Abstract:The recovery of cathode materials using deep eutectic solvents (DESs) still requires a long leaching time and relatively high temperatures. The poor selectivity of the leaching process leads to the low purity of the precipitate. Herein, a microwave-assisted choline chlorine–oxalate–water system was designed to selectively leach Li and recover high-purity cobalt oxalate simultaneously, which could greatly shorten the extraction time and decrease the leaching temperature. Fourier transform infrared spectroscopy, X-ray diffraction, inductively coupled plasma–mass spectrometry, and X-ray photoelectron spectroscopy methods were used to explore the mechanism of microwave-assisted DES leaching of valuable metals from lithium cobalt oxide (LCO). It was found that 99.05% of Li could be selectively leached and 99.21% of Co could be precipitated as cobalt oxalate at 100 °C in 10 min simultaneously. The purity of cobalt oxalate precipitated was 95.36% without any purification procedures. A new polymer compound Co2+[(Ch+) x (Cl–) y (HC2O4 –) z ] was formed during the microwave-assisted leaching process. The compound could be hydrolyzed, and the cobalt oxalate precipitate appeared by increasing the water content in the DES. Finally, the DES for the recovery of LCO could be cycled four times with favorable selectivity. A low-pollution, efficient, process-simple, and precipitant-free technology using a microwave-assisted DES for selective recovery of LCO was proposed, which provided an important reference method for large-scale recovery of valuable metals from spent lithium-ion batteries.

Mechanochemistry synthesis of high purity lithium carbonate

Process intensification for the synthesis and purification of battery-grade Li 2 CO 3 with microfluidics

Preparation of battery-grade Li2CO3 efficiently by high shear dispersion at low temperature

Enhancement of leaching of cobalt and lithium from spent lithium-ion batteries by mechanochemical process

Preparation of Battery-Grade Lithium Carbonate with Lithium-Containing Desorption Solution

Microbubble-assisted pressure carbonation for preparation of high purity lithium carbonate

Preparation of Li2CO3 Nanoparticles by Carbonation Reaction Using a Microfiltration Membrane Dispersion Microreactor

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Coupled reaction and solvent extraction process to form Li2CO3: Mechanism and product characterization

Purification of Lithium Carbonate from Radioactive Contaminants Using a MnO2-Based Inorganic Sorbent

Extraction Of LiCl From Low-Purity Chlorides Through Solid Electrolyte Towards High-Purity Li2CO3 Production

Purification of Li2CO3 obtained through pyrometallurgical treatment of NMC black mass from electric vehicle batteries

A Comprehensive Membrane Process for Preparing Lithium Carbonate from High Mg/Li Brine

A mechanochemical synthesis of submicron-sized Li<sub>2</sub>S and a mesoporous Li<sub>2</sub>S/C hybrid for high performance lithium/sulfur battery cathodes

Mg2Si Promoted Magnesio-Mechanical Reduction of Silica into Silicon Nanoparticles for High-Performance Li-ion Batteries

Lithium Extraction and Zeolite Synthesis via Mechanochemical Treatment of the Silicate Minerals Lepidolite, Spodumene, and Petalite

Mechanochemical synthesis of Li2OHI with enhanced lithium ionic conductivity

Universal and efficient extraction of lithium for lithium-ion battery recycling using mechanochemistry

Synthesis of High Purity Li2CO3 and MgCO3·3H2O in a Homogeneous-Like Organic Phase

An Efficient and Precipitant-Free Approach to Selectively Recover Lithium Cobalt Oxide Made for Cathode Materials Using a Microwave-Assisted Deep Eutectic Solvent

Sintering Mechanism and Leaching Kinetics of Low-Grade Mixed Lithium Ore and Limestone