Abstract:Lithium sources are of great significance for developing the next generation of lithium ion batteries. Most of the world’s lithium sources are found in salt lake brines. The main challenge of lithium extraction from salt lake brine is the separation of lithium ions from other coexisting ions, especially the separation of Li + and Mg 2+ . However, the traditional precipitation method for salt lake lithium extraction is cumbersome. In this project, a new electrolytic device with a solid-state electrolyte was developed for high-efficient lithium extraction from salt lake brines. Li 1+x Al x Ti 2−x (PO 4 ) 3 (LATP) is a promising NASICON-type solid-state electrolyte, which exhibits high ionic conductivity ( >10 -4 S/cm) at room temperature. LATP can be used as a lithium ion conductor, that is only lithium ions can transfer through it, which is ideal for separating lithium ions from other ions in salt lake brines. In this project, high-quality LATP was fabricated at a low cost. An electrolytic device was developed for lithium extraction, in which LATP was used together with a sacrificial anode, molten salts, and an inert cathode. Salt lake brines need to be concentrated by solar and/or wind evaporation before lithium extraction. The electrolytic device was operated above the melting point of the concentrated brine water, at which LATP exhibits a higher ionic conductivity for fast lithium ion transfer. A tiny voltage was applied across the two electrodes to drive the electrochemical reaction. The composition of lithium sources before and after extraction was investigated by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Results show that lithium sources with a higher purity level were successfully extracted with high efficiency. Impurity ions were almost completely blocked by LATP.

Producing battery grade lithium carbonate from salt‐lake brine via bipolar membrane carbon dioxide mineralization

A new process to produce battery grade lithium carbonate from salt lake brines by purification, synergistic solvent extraction and carbon dioxide stripping

A Comprehensive Membrane Process for Preparing Lithium Carbonate from High Mg/Li Brine

Production Process and Current Situation of Lithium Carbonate Extraction from Salt Lake Brine in China

A New Process to Produce Electric Grade Lithium Carbonate from the Baqiancuo Salt Lake Brine by Solvent Extraction

An integrated membrane process for preparation of lithium hydroxide from high Mg/Li ratio salt lake brine

Lithium recovery from salt-lake brine: Impact of competing cations, pretreatment and preconcentration

Lithium extraction from brine through a decoupled and membrane-free electrochemical cell design

Highly Efficient Separation of Magnesium and Lithium and High-Valued Utilization of Magnesium from Salt Lake Brine by a Reaction-Coupled Separation Technology

Lithium Recovery from Salt Lake Brine by Counter-Current Extraction Using Tributyl Phosphate/fecl3 in Methyl Isobutyl Ketone

Materials for lithium recovery from salt lake brine

Experimental study of the Tibetan Dangxiong Co salt lake brine during isothermal evaporation at 25 °C

Extraction Of LiCl From Low-Purity Chlorides Through Solid Electrolyte Towards High-Purity Li2CO3 Production

Analysis of a Process for Producing Battery Grade Lithium Hydroxide by Membrane Electrodialysis

Method for producing highly-pure battery grade lithium carbonate by using lithium sulfate solution

Production of Lithium Hydroxide from Lake Brines Through Electro–Electrodialysis with Bipolar Membranes (EEDBM)

Solid-State Electrolyte for Lithium Extraction from Salt Lake Brines

Solar-driven membrane separation for direct lithium extraction from artificial salt-lake brine

Process intensification for the synthesis and purification of battery-grade Li 2 CO 3 with microfluidics

Recovery of lithium from salt lake brine with high Na/Li ratio using solvent extraction

Recovery of lithium from salt lake brine using a mixed ternary solvent extraction system consisting of TBP, FeCl3 and P507