Recovery of lithium from salt lake brine using a mixed ternary solvent extraction system consisting of TBP, FeCl3 and P507

Hui Su,Zheng Li,Jian Zhang,Zhaowu Zhu,Lina Wang,Tao Qi

DOI: https://doi.org/10.1016/j.hydromet.2020.105487

IF: 4.217

2020-11-01

Hydrometallurgy

Abstract:<p>The consumption of lithium has been increasing rapidly due to its increasing application in lithium-ion batteries. The recovery of lithium from salt lake brines, which accounts for more than 70% of global lithium resources, has become increasingly studied; however, some challenges remain. In a previous study, a mixed ternary solvent extraction system consisting of TBP (tributyl phosphate), FeCl₃ and P507 (2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester) was developed. This newly developed system demonstrated good selectivity of Li over Mg and efficient lithium stripping simply using water. In the current study, to demonstrate its practical effectiveness, the TBP/FeCl₃/P507 system was tested with a real salt lake brine in both batch and multi-stage simulated counter-current modes. Detailed conditions for extraction, scrubbing and stripping were investigated. In the three-stage simulated counter-current extraction tests, the recovery of lithium reached 99.8%, and in the three-stage simulated counter-current stripping tests, the obtained loaded strip liquor contained (g·L⁻¹): Li, 20.9; Mg, 2.2; and B, 1.6. During stripping, the Fe³⁺ remained fully in the organic phase, enabling the organic phase to be directly used in the next extraction without regeneration. The high lithium selectivity, lithium recovery and efficient lithium stripping with water of the above process promotes it as a cost-effective and sustainable method for recovering lithium from brines with high Mg/Li ratios.</p>

metallurgy & metallurgical engineering