Abstract:The formation of mixed gas hydrates for pre- or post-combustion capture of carbon dioxide is considered a promising alternative to conventional carbon capture technologies. Yet, to keep up with conventional technologies or even reduce the cost of capture associated with them, a hydrate-based technology must have (1) a short induction time, (2) fast formation kinetics, and (3) moderate process conditions. To date, these requirements can only be met by adding promoters to the system, which comes at its own cost and disadvantages. Here, we show that the requirements can also be met without promoters by forming mixed gas hydrates in a packed bed of ice stabilized by fumed silica. While the high specific surface area of the packed bed warrants short induction times and fast kinetics, low temperatures ensure both moderate formation pressures and a high CO2 selectivity. The favorable properties can be maintained and even improved upon over many capture/regeneration cycles when operated at temperatures lower than 253 K, as this ensures a continuous formation of pores in the ice. We demonstrate the advantages of this route for carbon capture on a bench scale through batch, semi-batch, and continuous experiments. In semi-batch operation at 233 K and 40 bar, the mole fraction of CO2 in a synthetic flue gas is reduced from 15 mol% to 2.5 mol%. At the same thermodynamic conditions, a split fraction of 70% and a specific energy consumption below 3.0 GJ/tCO2 are achieved in continuous operation. The inherent advantages and simplicity of this process, a specific energy consumption comparable with the state of the art even though entirely based on the bench-scale experiment, as well as environmental harmlessness, emphasize the potential of this hydrate-based process to meet the demands of the industry at a minimal cost of capture.

Efficient hydrate-based carbon capture system enabled by red blood cell inspired encapsulation

A Biomimetic Red Blood Cell Inspired Encapsulation Design for Advanced Hydrate-Based Carbon Capture

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

A 3d Microfluidic Device For Carbon Capture Microcapsules Production

Energy consumption and economic analysis of CO 2 capture from flue gas by membrane separation coupled with hydrate method

Encapsulation of 2-amino-2-methyl-1-propanol with tetraethyl orthosilicate for CO2 capture

Hydrate-based Carbon Capture via Pressure Swing in a Packed Bed of Ice

Towards a high-rate operation of contact stabilization process: A microscopic view of carbon capture properties

Quest for optimal nanoconfinement for hydrate-based CO2 capture

Kinetic Enhancement of Capturing and Storing Greenhouse Gas and Volatile Organic Compound: Micro-mechanism and Micro-Structure of Hydrate Growth

Impact of Fixed Bed Reactor Orientation, Liquid Saturation, Bed Volume and Temperature on the Clathrate Hydrate Process for Pre-Combustion Carbon Capture

High Selectivity CO 2 Capture from Biogas by Hydration Separation Based on the Kinetic Difference in the Presence of 1,1-Dichloro-1-fluoroethane

CO2 Capture Technology Based on Gas Hydrate Method: a Review

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Promotion of Hydrate-Based CO2 Capture from Flue Gas by Additive Mixtures (THF (tetrahydrofuran) + TBAB (Tetra-N-butyl Ammonium Bromide))

Selective CO2 Capture from CO2/N2 Gas Mixtures Utilizing Tetrabutylammonium Fluoride Hydrates

Microencapsulation of advanced solvents for carbon capture

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2.

Carbon Capture from Natural Gas Flue Emissions and Air via (Bi)Carbonate Formation in a Cyclodextrin-Based Metal-Organic Framework

Novel in-capsule synthesis of metal–organic framework for innovative carbon dioxide capture system