Abstract:The product gas of natural gas hydrate production by CO2 replacement is the lean-CH4/CO2 binary gas which contains 85–95% CO2. In this work, the lean-CH4/CO2 (10 mol % CH4/90 mol % CO2) binary mixture was used to simulate the product gas of natural gas hydrate production via CO2 replacement, and a promising and mild (low pressure) hydrate-based gas separation (HBGS) technology was employed. This work innovatively proposes to inject the reaction liquid to maintain the constant pressure of the whole process, which makes hydrates form continuously to increase the gas consumption. First, the hydrate phase equilibrium of 10 mol % CH4/90 mol % CO2 + 5 wt % tetrabutylammonium bromide (TBAB, aq) was measured in the range of 280–287 K and 0.5–4 MPa. After that, hydrate-based mild separation of the lean-CH4/CO2 binary gas was conducted with the help of TBAB at a constant pressure in the range of 1–4 MPa. The results show that after HBGS in addition with 5 wt % TBAB(aq) at 1 MPa and 278 K, the CH4 concentration could be increased from 17.2 to 66.2 mol % under constant pressure operation, while it was just slightly increased to 17.2 mol % under nonconstant pressure operation. HBGS with 5 wt % TBAB under constant pressure had the best separation performance. Subcooling has a greater effect on the separation kinetics. HBGS of 10 mol % CH4/90 mol % CO2 under a constant pressure operation of 2 MPa, subcooling of 6 K, and 5 wt % TBAB has the highest separation factor above 37. It is suggested that hydrate-based lean-CH4/CO2 separation experiments are carried out at a mild pressure with low G/L and, more importantly, in a short time. This work proposed a mild HBGS of lean-CH4/CO2 separation, which could benefit the separation of gas produced by natural gas hydrate replacement exploitation. This work also simultaneously provides insights into other HBGS for other gas mixtures (flue gas, coalbed methane, biogas, and shift gas) to achieve low energy consumption, high gas consumption, and high efficiency.This article has not yet been cited by other publications.

Impact of Fixed Bed Reactor Orientation, Liquid Saturation, Bed Volume and Temperature on the Clathrate Hydrate Process for Pre-Combustion Carbon Capture

Semiclathrate Hydrate Process for Pre-Combustion Capture of Co2 at Near Ambient Temperatures

Semiclathrate Based CO2 Capture from Fuel Gas Mixture at Ambient Temperature: Effect of Concentrations of Tetra-N-butylammonium Fluoride (TBAF) and Kinetic Additives

Promotion of Hydrate-Based CO2 Capture from Flue Gas by Additive Mixtures (THF (tetrahydrofuran) + TBAB (Tetra-N-butyl Ammonium Bromide))

Systematic Evaluation of Semiclathrate-Based Pre-Combustion CO2 Capture in Presence of Tetra-N-butylammonium Fluoride (TBAF): Effect of TBAF Concentration and Kinetic Additives

Highly efficient separation and equilibrium recovery of H2/CO2 in hydrate-based pre-combustion CO2 capture

Hydrate-based Carbon Capture via Pressure Swing in a Packed Bed of Ice

Study of Selected Factors Affecting Hydrate-Based Carbon Dioxide Separation from Simulated Fuel Gas in Porous Media

Continuous CO 2 Capture in a Circulating Fluidized Bed Using Supported Amine Sorbents

High Selectivity CO 2 Capture from Biogas by Hydration Separation Based on the Kinetic Difference in the Presence of 1,1-Dichloro-1-fluoroethane

Water gas shift reaction in a catalytic bubbling fluidized bed reactor

Post-combustion CO2 capture and separation in flue gas based on hydrate technology:A review

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

Uncovering Hydrogen-to-carbon Ratio for Integrated CO2 Capture and Reverse Water-Gas Shift Reaction Through MFB-TGA-MS Analysis

Selective CO2 Capture from CO2/N2 Gas Mixtures Utilizing Tetrabutylammonium Fluoride Hydrates

Self-regulation of bed temperature field of the fixed-bed reactor unit by composite-filled oxygen carriers for chemical looping combustion of methane

Experimental investigation on the synergistic influence of tetra-n-butyl ammonium bromide(TBAB) and cyclopentane(CP) in hydrate-based gas separation

Quest for optimal nanoconfinement for hydrate-based CO2 capture

Hydrate-Based Mild Separation of Lean-CH 4 /CO 2 Binary Gas at Constant Pressure

Optimum operation condition of fluidized-bed homogeneous crystallization technology for the recovery of carbon dioxide captured in flue gas