Experimental investigation on the synergistic influence of tetra-n-butyl ammonium bromide(TBAB) and cyclopentane(CP) in hydrate-based gas separation

Xiaoya Zang,He Li,Yubao Zhang,Yong Chen,Yong He,Nengyou Wu,Xuebing Zhou,Deqing Liang
DOI: https://doi.org/10.1016/j.seppur.2023.124064
IF: 8.6
2023-05-23
Separation and Purification Technology
Abstract:To enhance the CO 2 separation efficiency of hydrate-based gas separation (HBGS) technology, the kinetic process of hydrate formation from synthesized CH 4 /CO 2 /N 2 gas mixtures in the presence of cyclopentane (CP) and tetra-n-butyl ammonium bromide (TBAB) and gas separation efficiency were studied at an initial pressure of 7.0 MPa and temperatures ranging from 275.1 to 290.1 K. The crystallographic properties of the mixed hydrates were also evaluated by Raman, powder X-ray diffraction(XRD) and cryo-scanning electron microscop(cryo-SEM). Results showed that the combination of CP and TBAB tended to inhibit the separation efficiency compared with pure CP. The maximum CH 4 recovery was 1.37 and the CO 2 split ratio was 0.791 when using CP and TBAB solution. The order of CO 2 split ratio in the different systems followed the order SDS > CP > TBAB/CP > CP/SDS > TBAB. Meanwhile, the adsorption capacity and gas consumption also decreased with an increase in TBAB concentration. Raman and XRD tests revealed that sI, sII, and semi-clathrate hydrates were found to coexist after hydrate formation and no other types of hydrates was formed. CH 4 could only enter the small cages (5 12 ) of the hydrate. SEM images showed that the hydrate crystals were ellipsoid-shaped with different sizes and stacked together to form a globular structure, suggesting that the specific surface area of the hydrate crystals enhanced with the increasing of TBAB concentration. These findings can be used to evaluate the feasibility of applying TBAB and CP in HBGS technology.
engineering, chemical
What problem does this paper attempt to address?