Abstract:Converting CO2 into methane is considered a promising and economically viable technology for global transportation and utilization of this greenhouse gas. This study involves the preparation of a Ni-CZ (CeO2-ZrO2)/ATP (attapulgite) catalyst through the co-precipitation and impregnation methods. XRD, SEM, TEM, N2 absorption-desorption isotherms, XPS, H2-TPR, CO2-TPD, TG/DSC, and Raman were adapted to characterize the obtained samples. Real-time GC was used to measure the catalytic performances and to intensively study the impact of Ni loading content and ATP to CZ ratio on the catalytic performance of the products. DRIFTs was used to monitor the interstitial radicals in the catalytic reactions and to deduce the catalytic mechanisms. The results indicate that the composite catalytic matrix composed of CZ assembled on ATP demonstrated higher CO2 methanation stability and better carbon deposition resistance ability than the single CZ or ATP as the carrier, which should be attributed to the improved specific surface area and pore volume of the ATP assembled matrix and the enhanced dispersibility of the CZ and Ni species. The adoption of CZ solid solutions improves the oxygen storage capability of the catalyst, thereby providing continued mobile O2− in the matrix and accelerating the molecular exchange rate in the catalytic reactions. The ideal loading quantity of nickel contents on the CZA matrix is 15%, as the CO2 conversion decreases at elevated temperatures when the Ni loading content reaches 20%. Among the tested samples, the 15Ni-0.8CZA sample showed the best catalytic performance of 75% CO2 conversion and 100% CH4 selectivity at 400 °C. After 50 h of stability tests, the CO2 conversion rate still remained 70.84%, and the CH4 selectivity obtained 97.46%. No obvious coke was detected according to the Raman spectra of the used catalyst. The in situ DRIFTS experiment showed that formate is the main intermediate of the CO2 hydrogenation reaction on the 15Ni-0.8CZA catalyst.

Uncovering Hydrogen-to-carbon Ratio for Integrated CO2 Capture and Reverse Water-Gas Shift Reaction Through MFB-TGA-MS Analysis

Limestone hydrogenation combined with reverse water–gas shift reaction under fluidized and iso -thermal conditions using MFB-TGA-MS

An Experimental and Kinetic Modeling Study of CO2 Hydrogenation to CO over Cu-Al Catalyst Utilizing MFB-TGA-MS

Near-equilibrium Analysis of CO2 2 Partial Pressure on Carbonate Hydrogenation in an Integrated Carbon Capture and Utilization Scheme

Near-equilibrium analysis of CO2 partial pressure on carbonate hydrogenation in an integrated carbon capture and utilization scheme

Mechanistic Study of Integrated CO2 Capture and Utilization over Cu and Al-modified Calcined Limestone with High Stability Using MFB-TGA-MS

Utilizing Limestone Alone for Integrated CO2 Capture and Reverse Water-Gas Reaction in a Fixed Bed Reactor: Employing Mass and Gas Signal Analysis

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

Heterojunction-redox Catalysts of FexCoyMg10CaO for High-Temperature CO2 Capture and in Situ Conversion in the Context of Green Manufacturing

Enhanced H2 Recovery by Coupling the Water-Gas Shift Reaction with in-situ CO2 Capture and Mineralization using Earth Abundant Ca- and Mg-Silicates and Hydroxides

Kinetic Conversion of Carbon Dioxide in Supported Tungsten Carbide Catalysts and Oxide Catalysts for the Reverse Water Gas Shift Reaction

Direct and continuous conversion of flue gas CO2 into green fuels using dual function materials in a circulating fluidized bed system

Recent advances in hydrogenation of CO2 to CO with heterogeneous catalysts through the Reverse Water Gas Shift Reaction

Potassium-Promoted Limestone for Preferential Direct Hydrogenation of Carbonates in Integrated CO2 Capture and Utilization

Selectivity control between reverse water-gas shift and fischer-tropsch synthesis in carbon-supported iron-based catalysts for CO 2 hydrogenation

Microfluidic‐Aerosol Hyphenated Synthesis of Metal–Organic Framework‐Derived Hybrid Catalysts for CO2 Utilization

Impact of H2/CO Ratios on Phase and Performance of Mn-modified Fe-based Fischer Tropsch Synthesis Catalyst

Identification of Relevant Active Sites and A Mechanism Study for Reverse Water Gas Shift Reaction over Pt/Ceo2 Catalysts

Analysis of integrated CO 2 capture and utilization via calcium-looping in-situ dry reforming of methane and Fischer-Tropsch for synthetic fuels production

Characterization on Trace Carbon Monoxide Leakage in High Purity Hydrogen in Sorption Enhanced Water Gas Shifting Process

Effective CO2 Thermocatalytic Hydrogenation with High Coke Resistance on Ni-CZ/Attapulgite Composite