Abstract:The integrated carbon capture and utilization (ICCU) technology, combined with the reverse water-gas shift reaction (RWGS), is considered a promising strategy for mitigating carbon emissions. This study investigates the limestone calcination and hydrogenation processes under relatively high partial pressures of CO2 2 in near- equilibrium conditions, at partial pressures ( P ) close to the equilibrium pressure (Peq), P eq ), relevant to the ICCU-RWGS process, particularly during the in-situ CO2 2 conversion stage. The decomposition of CaCO3 3 during conventional calcination and hydrogenation under near-equilibrium conditions was initially examined using micro-fluidized bed thermogravimetric analysis coupled with mass spectrometry (MFB-TGA-MS) and a particle-injecting method. The results indicated that limestone decomposition during conventional calcination was inhibited under near- equilibrium conditions, with conversion near 0%. However, during the hydrogenation process, the interaction between H2 2 and CaCO3 3 further activated the decomposition of limestone. At 750 degrees C and P /Peq P eq = 0.9, limestone particles took similar to 100 s to achieve complete conversion (100%). Given the known self-catalytic activity of CaO in converting carbonate to CO during hydrogenation, a dual-layer limestone hydrogenation process was further conducted using a fixed bed reactor. At 850 degrees C and a 30 vol.% H2 2 atmosphere, the limestone decomposition rate increased significantly and subsequently reacted with H2 2 to form CO, resulting in an H2 2 /CO ratio of approximately 2.5. These findings support the viability of ICCU-RWGS approaches for future commercialization, with the product gas serving as the feedstock for the Fischer-Tropsch Synthesis (FTS) process.

Utilizing Limestone Alone for Integrated CO2 Capture and Reverse Water-Gas Reaction in a Fixed Bed Reactor: Employing Mass and Gas Signal Analysis

Mechanistic Study of Integrated CO2 Capture and Utilization over Cu and Al-modified Calcined Limestone with High Stability Using MFB-TGA-MS

Limestone hydrogenation combined with reverse water–gas shift reaction under fluidized and iso -thermal conditions using MFB-TGA-MS

Near-equilibrium analysis of CO2 partial pressure on carbonate hydrogenation in an integrated carbon capture and utilization scheme

Near-equilibrium Analysis of CO2 2 Partial Pressure on Carbonate Hydrogenation in an Integrated Carbon Capture and Utilization Scheme

Potassium-Promoted Limestone for Preferential Direct Hydrogenation of Carbonates in Integrated CO2 Capture and Utilization

Uncovering Hydrogen-to-carbon Ratio for Integrated CO2 Capture and Reverse Water-Gas Shift Reaction Through MFB-TGA-MS Analysis

Reactivation of calcium-based sorbent by water hydration for CO2 capture

Bifunctional Ni-Ca based material for integrated CO2 capture and conversion via calcium-looping dry reforming

Synthetic Ni–CaO–CeO 2 dual function materials for integrated CO 2 capture and conversion via reverse water–gas shift reaction

CO2 Capture for Dry Reforming of Natural Gas: Performance and Process Modeling of Calcium Carbonate Looping Using Acid Based CaCO3 Sorbent

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Experimental Investigation of a Continuous Reactor for CO2 Capture and CaCO3 Precipitation

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Process Analysis of CO2 Capture from Flue Gas Using Carbonation/calcination Cycles

Li/Na/K carbonate solar salts for enhanced and integrated carbon capture and utilization via reverse water gas shift (ICCU-RWGS)

Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture

Integrated CO2 capture and utilization with CaO-alone for high purity syngas production

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Comparative investigation on CO2 uptake performance of limestone-derived sorbents with different supports synthesized by impregnated layer solution combustion method

Integrated high-gravity process for HCl removal and CO 2 capture using carbide slag slurry in a rotor-stator reactor: Experimental and modeling studies