Abstract:We have designed, optimized, fabricated and characterized highly reflective quasi-omnidirectional (angular range of $0-60^\circ$) multilayered structures with a wide spectral range. Two techniques, chirping (a continuous change in thicknesses) and stacking of Bragg-type sub-structures, have been used to enhance the reflectance with minimum thickness for a given pair of refractive indices. Numerical calculations were carried out employing the transfer matrix method and we optimized the design parameters to obtain maximal reflectance averaged over different spectral ranges for all angles. We fabricated some of the optimized structures with porous silicon dielectric multilayers with low refractive contrast and compared their measured optical properties with the calculations. Two chirped structures with thicknesses 21.6 $\mu$m and 60.4 $\mu$m, resulting in quasi omnidirectional mirrors with bandwidths of 360 nm and 1800 nm, centered at 1160 nm and 1925 nm respectively have been shown. In addition, we fabricated a stacked sub-Bragg mirror structure with a quasi omnidirectional bandwidth of 1800 nm (centered at 1850 nm) and a thickness of 41.5 $\mu$m, which is almost two third (in thickness) of the chirped structure. Thus, our techniques allowed us to obtain relatively thin quasi-omnidirectional mirrors with wide bands over different wavelength ranges. Our analysis techniques can be used for the optimization of the reflectance not only in multilayered PS systems with different refractive index contrasts but also for systems with other types of materials with low refractive index contrast. The present study could also be useful for obtaining omnidirectional dielectric mirrors in large spectral regions using different materials, flat focusing reflectors, thermal regulators, or, if defects are included, as filters or remote chemical/biosensors with a wide angular independent response.

Optimization of Cr/Sc-based multilayer mirrors for water window soft x-rays

Low-diffraction EMI-shielding Multiband Optical Window Based on Randomized Metallic Mesh

Scanning Interferometric Method for Measuring Group Delay of Dispersive Mirrors

Scratch-resistant Antireflective Coating for Mid-Wave Infrared Band

Aperiodic multilayer mirrors for efficient broadband reflection in the extreme ultraviolet

Optimization Design of Pt/C Multilayer Supermirrorsfor Hard X-rays

Advanced materials for multilayer mirrors for extreme ultraviolet solar astronomy

Optimized Si/SiO2 high contrast grating mirror design for mid-infrared wavelength range: robustness enhancement

Design of multilayer extreme-ultraviolet mirrors for enhanced reflectivity

Fundamental Study of Wave Propagation on Liquid Surface Related IFE Mirror

Multistrip multilayer mirrors for sources based on inverse Compton scattering

The Design and Fabrication of Multilayer Mirrors in EUV Region

Subdiffraction‐Limited Motheye‐Like Metastructures Fabrication by Dual‐Beam Overexposure Methodology Enhancing Broadband Infrared Antireflective Application (Advanced Optical Materials 29/2024)

Optimization of wide-band quasi-omnidirectional 1-D photonic structures

An etched multilayer as a dispersive element in a curved-crystal spectrometer: implementation and performance

Thermal Infrared And Broadband Microwave Stealth Glass Windows Based On Multi-Band Optimization

Development of Aperiodic Multilayer Mirrors Operated at W-Lβ Line for Plasma Diagnostics Application

Atomic-precision multilayer coating of the first set of optics for an extreme-ultraviolet lithography prototype system

Wave-front correction methods for extreme-ultraviolet multilayer reflectors

Depth-graded Mo/Si multilayer coatings for hard x-rays

Optimized dielectric mirror coating designs for quasi-harmonic cavity resonance