Abstract:Commercial EUV lithographic systems require multilayers with higher reflectance and better stability than those published to date. This work represents our effort to meet these specifications. Interface-engineered Mo-Si multilayers with 70% reflectance and 0.545-nm bandwidth at 13.5-nm wavelength and 71% reflectance with 0.49-nm bandwidth at 12.7-nm wavelength were developed. These results were achieved with 50 bilayers. These new multilayers consist of alternating Mo and Si layers separated by thin boron carbide layers. Depositing boron carbide on the interfaces leads to reduction in molybdenum silicide formation of the Mo-on-Si interfaces. Bilayer contraction is reduced by 30%, implying that there is less intermixing of Mo and Si to form silicide. As a result, the Mo-on-Si interfaces are sharper in interface-engineered multilayers than in standard Mo-Si multilayers. The optimum boron carbide thicknesses have been determined and appear to be different for the Mo-on-Si and Si-on-Mo interfaces. The best results were obtained with 0.4-nm-thick boron carbide layers for the Mo-on-Si interfaces and 0.25-nm-thick boron carbide layers for the Si-on-Mo interfaces. The increase in reflectance is consistent with multilayers having sharper and smoother interfaces. A significant improvement in oxidation resistance of EUV multilayers has been achieved with ruthenium-terminated Mo-Si multilayers. The best capping-layer design consists of a Ru layer separated from the top Si layer by a boron carbide diffusion barrier. This design achieves high reflectance and the best oxidation resistance during EUV exposure in a water-vapor (oxidizing) environment. Electron-beam exposures of 4.5 h (in an effort to simulate EUV exposure perturbation of the top layers) in the presence of 5×10−7-Torr water-vapor partial pressure show no measurable reflectance loss and no increase in the oxide thickness of Ru-terminated multilayers. © 2002 Society of Photo-Optical Instrumentation Engineers.

Depth-graded Mo/Si multilayer coatings for hard x-rays

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

Hard Antireflective Coatings in the Visible Band

Mo/Si Multilayers with Different Barrier Layers for Applications as Extreme Ultraviolet Mirrors

Experimental comparison of extreme-ultraviolet multilayers for solar physics

High-performance Mo-Si multilayer coatings for extreme-ultraviolet lithography by ion-beam deposition.

Improved reflectance and stability of Mo-Si multilayers

Optimization Design of Pt/C Multilayer Supermirrorsfor Hard X-rays

Mo/Si multilayer-coated ruled blazed gratings for the soft-x-ray region

High-resolution x-ray analysis with multilayer gratings

X-ray induced damage of B4C-coated bilayer materials under various irradiation conditions

Multilayer coatings for narrow-band imaging in the extreme ultraviolet

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

Effects of mo/si multilayer coatings on the imaging characteristics of an extreme-ultraviolet lithography system

An etched multilayer as a dispersive element in a curved-crystal spectrometer: implementation and performance

Atomic-precision multilayer coating of the first set of optics for an extreme-ultraviolet lithography prototype system

Physical properties of amorphous molybdenum silicide films for single photon detectors

Analysis of microroughness evolution in X-ray astronomical multilayer mirrors by surface topography with the MPES program and by X-ray scattering

Impact of B 4 C buffer layer on interface diffusion in Cr/Sc multilayers: combined study by X-ray reflectivity, scattering and fluorescence

Angle resolved photoelectron spectroscopy as applied to X-ray mirrors: an in depth study of Mo/Si multilayer systems

X-ray scattering of periodic and graded multilayers: comparison of experiments to simulations from surface microroughness characterization