Abstract:The solid oxide fuel cell (SOFC) may suffer structural damage even performance degradation caused by large temperature gradient at high temperature. Therefore, it is necessary to implement thermal management of SOFC to keep temperature gradients within safe limits. In such context, this work designs three novel flow channels and investigates their effects on SOFC temperature distribution characteristics and electrochemical performance. Three novel flow channels with semicircular, rectangular and trapezoidal disturbances are considered. It was found that the temperature gradient and maximum temperature can be decreased to a certain extent by setting the disturbance within the flow channel. Moreover, the rectangular disturbance is better than semicircular disturbance and trapezoidal disturbance in reducing temperature gradient. The maximum temperature and temperature gradient of the cell could be reduced from 880 °C to 840 °C and 24 K/cm to 12 K/cm, respectively by using rectangular disturbance. In the region with a large temperature gradient, increasing the disturbance depth can decrease the temperature gradient more effectively. However, around the region with a small temperature gradient, increasing the disturbance depth results in a large temperature gradient reversely. Moreover, increasing the disturbance depth also reduces the output current density and causes the increase of channel pressure drop. It is suggested to increase the depth of local disturbance where the temperature gradient is large and to reduce the depth of local disturbance where the temperature gradient is already small. By comparison with the decrease of channel thickness, the internal disturbance structure is beneficial to decrease temperature gradient when the air inlet flow rate is kept a constant.

Temperature gradient reduction in a tubular direct ammonia solid oxide fuel cell by fluidizing the cathode particles

Local heat generation management for temperature gradient reduction in tubular solid oxide fuel cells

Towards Feasible Temperature Management and Thermo-Mechanical Stability of Carbon-Assisted Solid Oxide Electrolysis Cell

Reducing temperature difference of a direct ammonia tubular SOFC to 1K

Local heat transfer enhancement by recirculation flows for temperature gradient reduction in a tubular SOFC

A Reduced-Order Electrochemical Model for Analyzing Temperature Distributions in a Tubular Solid Oxide Fuel Cell Stack

A Novel Flow Channel Design to Achieve High Temperature Homogenization in Solid Oxide Fuel Cell

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Introducing Anode Fluidization into a Tubular Liquid Antimony Anode Direct Carbon Fuel Cell

Optimizing fuel transport and distribution in gradient channel anode of solid oxide fuel cell

A Review Of Heat Transfer And Thermal Management Methods For Temperature Gradient Reduction In Solid Oxide Fuel Cell (Sofc) Stacks

Study of thermal effects in ammonia-fueled solid oxide fuel cells

An Experimental Evaluation of the Temperature Gradient in Solid Oxide Fuel Cells

Tailoring the solid oxide fuel cell anode support composition and microstructure for low‐temperature applications

The Reduction Process of a NiO/YSZ Anode for Intermediate Temperature Solid Oxide Fuel Cells

Effect of Radial Flows in Fuel Channels on Thermal Performance of Counterflow Tubular Solid Oxide Fuel Cells

Design of novel flow channels of tubular biomass-syngas fueled SOFC towards uniform temperature distribution

Liquid Antimony Anode Fluidization Within A Tubular Direct Carbon Fuel Cell

Simulation and enhancement of axial temperature distribution in a reactor filled with in-situ electrically heated structured catalyst

Numerical Study of Temperature Distribution in Tubular Segmented-in-series SOFC with Co-Flow and Counter-Flow Arrangements

Numerical Investigation on the Temperature Distribution Inside the Engine Compartment of a Fuel Cell Vehicle with Nanofluids As Coolant