Abstract:The metastable dual phase FeMnCoCr high entropy alloy (HEA) has attracted great attention since it was first proposed, as it can overcome the strength-ductility trade-off at room temperature. For materials in engineering applications, it is also important to achieve high corrosion resistance while maintaining good mechanical properties. In this study, we simultaneously improved the mechanical properties and corrosion resistance of a FeMnCoCr-based HEA via Cu alloying and by applying a simple processing route that combined cold rolling and partial recrystallization annealing. The alloy doped with 0.3 at.% Cu and processed by annealing at 650 °C for 3 min exhibited the best combination of strength and ductility, i.e., yield strength of 768 MPa, tensile strength of 960 MPa and uniform elongation of 33.6%. The high yield strength majorly originated from high density dislocations and grain boundaries in the material, while the formation of deformation twins, martensite laths, stacking faults and Lomer Cottrell locks contributed to the continuous strain hardening and good ductility. The addition of Cu also enhanced corrosion resistance of the HEA in a NaCl solution by improving stability of the alloy matrix and elevating compactness of the passive film. The solid solution of Cu elevated equilibrium potential of the matrix and promotes transformation of microstructure from the face-centered cubic (fcc) plus hexagonal close-packed (hcp) dual phases to the fcc single phase, effectively inhibiting the accelerated corrosion of micro galvanic couple between different phases and enhancing stability of the matrix. At the same time, the enrichment of CuO in the inner layer of the passive film reduced the defect density within the Fe-rich oxide layer, improving the protection of the passive film against the matrix.

Mechanical Strengthening and Corrosion Behavior of Friction Stir Welded Dual-Phase Fe50Mn30Co10Cr10 High Entropy Alloy

Microstructure Evolution and Mechanical Properties of Friction Stir Welded Fe50Mn30Co10Cr10 High-Entropy Alloy

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Friction Stir Lap Welding Between Al and FeCoCrNiMn High Entropy Alloy

Microstructure and Properties of a Co-Free Fe50mn27ni10cr13 High Entropy Alloy

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Microstructure and Mechanical Properties of Friction Stir Lap Welds Between FeCoCrNiMn High Entropy Alloy and 6061 Al Alloy

Friction Stir Welding of the Carbon-Doped Dual-Phase High Entropy Alloy

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Microstructure and Corrosion Properties of Cr41CoFeNi Eutectic High-Entropy Alloy in Sulfuric Acid Solution

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Microstructural Evolution and Strengthening Mechanisms in CrxMnFeNi High-Entropy Alloy

Enhanced corrosion resistance of CoCrFeMnNi high entropy alloy using heterogeneous structure design

Enhanced strength and ductility synergy of a CoCrFeMnNi high entropy alloy with a hierarchical structure via severe distortion

Enhancement of strength–ductility combination and corrosion resistance behaviour in (FeCoNiCr) 92 Ti 3.5 Al 4.5 high-entropy alloy

A Dual-Phase Fe-Co-Ni-Cr-Mn High Entropy Alloy Thin Film with Superior Strength and Corrosion-Resistance

Weldability of high entropy alloys: Microstructure, mechanical property, and corrosion resistance

Microstructure and Corrosion Properties of Crmnfeconi High Entropy Alloy Coating

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Comparative Study of Mechanical and Corrosion Behaviors of Cost-Effective AlCrFeNi High Entropy Alloys