Abstract:In the pursuit of high performance development of alloy materials, it is a long-standing problem to enhance strength and toughness simultaneously. In this study, by selecting heterogeneous high-entropy alloy (HEA) materials and conducting structural design and laser process optimization, an external-hard internal-tough HEA composite coating with an in-situ dual-phase interface layer was successfully prepared. For the microstructure, the phase structures at the top, middle, and bottom of the coating are single-phase body-centered cubic (BCC), dual-phase BCC/face-centered cubic (FCC), and single-phase FCC, respectively. Among them, the dual-phase interface layer gives priority to the FCC phase (79.4 %), supplemented by the BCC phase (16.7 %). In terms of mechanical properties, the hardness of the coating from the top to the bottom is 9.85 GPa, 5.53 GPa, and 4.86 GPa, respectively. As demonstrated by employing the three methods of K, H/E, and H 3 /E 2 , the HEA composite coating has favorable integrated characteristics of strength and toughness. Meanwhile, due to the in-situ generated dual-phase interface layer, the structural and performance differences between the high-hardness layer and the high-toughness layer are effectively alleviated, and the stress concentration is reduced, thus stabilizing the overall structure of the coating. Hence, the HEA composite coating designed and prepared in this study possesses better erosion resistance (mass erosion rate = 0.141 × 10 −3 g.cm −2 s −1 ), tribological properties (wear rate = 0.30 × 10 −6 mm 3 /(N · m)), and impact resistance (AKU = 103.5 ± 2.8 J). The study results can provide new methods and new theories for new HEA composite coatings with integrated strength and toughness, and can be used in guiding the development and design of similar HEA composite coating structures.

A Dual-Phase Fe-Co-Ni-Cr-Mn High Entropy Alloy Thin Film with Superior Strength and Corrosion-Resistance

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Microstructure and Properties of a Co-Free Fe50mn27ni10cr13 High Entropy Alloy

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

High Hardness Dual-Phase High Entropy Alloy Thin Films Produced by Interface Alloying

A novel complex-structure Co-free Cr-Fe-Ni-Al-Si-Ti-Cu high entropy alloy with outstanding mechanical properties in as-cast and cold-rolled states

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Realizing high strength and toughness of gradient high-entropy alloy coating by in-situ interface reaction of FeCoCrNi/FeCoCrAl

Ultrahigh Specific Hardness of Co-Ni-V-Al Medium Entropy Alloy Thin Films

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

A novel Fe-rich Co-free high entropy alloys with low cost and excellent comprehensive mechanical properties

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

High hardness and fatigue resistance of CoCrFeMnNi high entropy alloy films with ultrahigh-density nanotwins

Introducing a new heterogeneous nanocomposite thin film with superior mechanical properties and thermal stability

A Lightweight AlTiVNb High-Entropy Alloy Film with High Strength-Ductility Synergy and Corrosion Resistance

Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys

Microstructure, mechanical and tribological properties of oxide dispersion strengthened CoCrFeMnNi high-entropy alloys fabricated by powder metallurgy