Abstract:The development of alloys with good combinations of strength-ductility and corrosion resistance is a long-standing research theme for advanced materials engineering, which also holds true for the newly emerged high-entropy alloys (HEAs). Here, Ni/Ti-rich precipitates and heterogeneous structure were introduced for the primary purpose of improving strength-plasticity synergy of a Co-free Fe4Ni4Mn2CrTi HEA with good anti-corrosion performance. Specifically, four typical states of this HEA were tailored and compared, including i) as-cast, ii) homogenized, iii) post deformation annealing (PDA) sample with heterogeneous structure and iv) PDA sample with homogeneous structure. The structural features, mechanical properties, and underlying phase transformation mechanisms were systematically investigated. Phase transformation of η-D024 to γ′-L12 was realized during annealing treatments, based on the intrinsic stacking faults formed by repeating removal of the (0001) planes in the η structure. Compared with the homogenized counterpart, the strength-ductility synergy was achieved in the alloy iv, showing an evident increment of ∼43.4% in yield strength ( σ 0.2 ) and ∼57.8% in ultimate tensile strength ( σ U T S ), respectively, resulting from solid-solution strengthening, grain-boundary strengthening and precipitation strengthening, yet without sacrificing ductility. Good combinations of strength and ductility were also achieved in the alloy iii with heterogeneous structure, possessing an even higher σ 0.2 and σ U T S yet maintaining a moderate elongation, whose strength contribution from hetero-deformation induced hardening is recognized as a significant strengthening mechanism. Additionally, in comparison with the conventional corrosion-resistant 304 stainless steel, compact TiO2 and Cr2O3 in the passive film give rise to more superior anti-corrosion properties of the homogenized HEA. This paper provides a new paradigm in the controllable design of novel low-cost high-performance HEAs for achieving their potential structural and functional engineering applications.

Enhancement of strength–ductility combination and corrosion resistance behaviour in (FeCoNiCr) 92 Ti 3.5 Al 4.5 high-entropy alloy

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Realizing good combinations of strength-ductility and corrosion resistance in a Co-free Fe4Ni4Mn2CrTi high-entropy alloy via tailoring Ni/Ti-rich precipitates and heterogeneous structure

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy

Effect of Heat Treatment on the Microstructure and Mechanical Properties of the Al0.6CoCrFeNi High-Entropy Alloy

Achieving superior strength-ductility balance of Co–Cr–Fe–Ni high entropy alloy via annealing

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment

Enhanced strength in Co-free Ni47.5-xFe25Cr25AlxTi2.5 high entropy alloys via introducing dual precipitates

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Effects of Ti addition and annealing on microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy

Strength-ductility Synergy of Al0.3CoCrFeNiCu High-Entropy Alloy Via Cold Rolling and Subsequent Annealing

Effect of Annealing on Microstructure Evolution and Tensile Behavior of Hot-Rolled FeMnCoCrAl High-Entropy Alloy

Microstructural evolution and mechanical behavior of Co‐free (Fe40Ni30Cr20Al10)100‐x Ti x high‐entropy alloys

Improvement of the corrosion performance of a cold-rolled Co40Cr20Ni30Al5Ti5 high-entropy alloy by adjusting annealing treatments

Titanium doping levels and their effects on FeCoCrNi high-entropy alloys: From microstructure to performance