Abstract:The aspheric test via finite distance null compensation is limited by too many adjustment factors and low test precision. Here we establish an aspheric test system by integrating front null compensation with back null compensation, in which a compensation lens is used before and after the spherical center of the mirror to be tested and thus the front and back areas show aberration correlation. First, based on the aberration theory, the optical parameters of two compensation lenses arc theoretically derived and solved, and the relationship between the initial parameters and the normalized data is analyzed. Then the normalized results arc scaled and optimized by the optical design software. Four concave parabolic mirrors with different curvature radii arc designed under different magnifications of front null compensation lenses. The maximum aperture and the maximum relative aperture of the aspheric mirror arc obtained. The compensation lens with a 1/10 aperture ratio is used to realize the aspheric test of an aspheric mirror with a large aperture of 3.7 m and a large relative aperture of 1/1.2, and the peak-valley (PV) value of the residual wavefront error is superior to 0.1 lambda (lambda=633 nn). The tolerance analysis confirms that the test system is feasible. The principle experiment is conducted for the parabolic mirror with an aperture of 500 mm and a relative aperture of 1/1. The maximum diameter of the aspheric mirror and the difficulty of implementation arc compared between the proposed method and the classical configuration. The PV value and the RMS value of the designed wavefront error of the test system combining front and back null compensation is 0.061 lambda and 0.009 lambda, respectively. The RMS value is superior to lambda/10. The test system combining front and back null compensation is suitable for the high-precision test of aspheric surfaces with I m large diameter and large relative aperture.

Distance Deviation Sensitivity on Null Test of Convex Hyperboloid Mirrors with Large Relative Aperture

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Analysis on mirrors installation error of high-accuracy long focal length measurement system

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

Mixed compensation for the testing of large convex aspheres

Research of precision interference locating method for a partial null compensator at aspheric testing

Research on hybrid compensation testing of convex aspherical mirror

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Non-null interferometric aspheric testing with partial null lens and reverse optimization

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Non-null Testing of the Aspheric Surface Using a Quadriwave Lateral Shearing Interferometer

Testing of Large-Aperture Aspheric Mirrors Using a Single Coated Lens.

Hybrid Refractive and Diffractive Testing Method for Free-Form Convex Mirror in High-Resolution Remote-Sensing Cameras

Aspheric Test Combining Front and Back Null Compensation for Infinite Optical Path

Corrective machining of monolithic multiple freeform mirrors based on holographic null test

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Testing of an off-axis convex hyperboloid mirror using compensator

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

The Optimization of a Convex Aspheric Lightweight SiC Mirror and Its Optical Metrology

3D shape measurement of convex aspheric surface using reverse Hartmann test