Abstract:In previous work, wavefront coding technology has been applied on an off-axis three mirror anastigmatic optical system. The secondary mirror is selected as the wavefront coded element. After redesigned the surface of secondary mirror becomes an unusual unrotational-symmetric surface with cubic term, which can not be tested by traditional null testing with compensator. For preparing for manufacturing and testing this kind of elements, a simple cubic surface whose equation is z = 3 lambda(x(3) + y(3)) ( where x, y is normalized coordinate, lambda = 0.6328 mu m) is polished. The final surface figure is 0.327 lambda (PV) and 0.023 lambda (RMS). The manufacture of this surface is introduced in this paper. The tilt component is subtracted to minimize the material removal. Also a non-null method is described for testing the experimental element. The deviation from a reference plane of the cubic surface is regarded as system error. In another words, the ideal cubic surface is set as the reference artificially. A special system error file for interferometer can be created so that the cubic term can be extracted during the testing process automatically. The residual error is just the departure from the ideal figure of the surface under machining by this way. The error and effective range is also presented. But the method may not be practical for the secondary mirror as wavefront coded element because the surface of that kind is convex asphere added cubic term. An improved non-null method is discussed for testing this kind of surface.

Testing of an off-axis convex hyperboloid mirror using compensator

Testing of Large-Aperture Aspheric Mirrors Using a Single Coated Lens.

Research of precision interference locating method for a partial null compensator at aspheric testing

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Mixed compensation for the testing of large convex aspheres

Non-null interferometric aspheric testing with partial null lens and reverse optimization

Research on hybrid compensation testing of convex aspherical mirror

Non-null Testing of the Aspheric Surface Using a Quadriwave Lateral Shearing Interferometer

The Wavefront Aberration Analysis and Testing Accuracy Evaluation for the Large Aberration Aspheric System Based on the Best Fit Sphere

The wavefront aberration analysis and testing accuracy evaluation for the large aberration aspheric system based on the best fit sphere - art. no. 68342V

Simulation of Convex Aspherical Surface Testing with Partial Compensating Interferometer

Digital testing of transmitted wavefront distortion for micro-optics

Misalignment Correction for Free-Form Surface in Non-Null Interferometric Testing

Reverse Optimization Reconstruction of Aspheric Figure Error in a Non-Null Interferometer

Novel Algorithm for Compensating Misalignment in Optical Spherical Surface Testing

Retrace Error Correction for Non-Null Testing of Optical Aspheric Surface

Autocollimating compensator for controlling aspheric optical surfaces

Stowing Distortion of Space Optical Tilt Mirror

The Optimization of a Convex Aspheric Lightweight SiC Mirror and Its Optical Metrology

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

The Manufacturing and Testing of an Unrotational-Symmetric Sic Mirror