Abstract:Solar Salt, a molten nitrate salt, plays a crucial role in heat transfer and storage within solar thermal power plants. It helps to mitigate power output fluctuations resulting from changes in sunlight. Additionally, it allows nuclear power plants with thermal energy storage adjusting power output to better meet grid demand, all without altering reactor power. Maintaining the stability of Solar Salt is vital for ensuring the efficiency and cost-effectiveness of these operations. A study was conducted by subjecting fresh Solar Salt to pre-heating at temperatures surpassing the typical operational limits, referred to as the precondition phase, of the Natrium™ Demonstration nuclear plant being built with TerraPower, LLC and GE-Hitachi technology. Subsequently, the focus centered on examining the thermal stability of the preconditioned molten salt under the maximum operating conditions within the ambient atmospheric environment. The preconditioned molten salt, kept at 540 °C for 10 days, consistently exhibited minimal daily mass loss rates at its maximum operating temperatures of 480 and 510 °C, in contrast to the unpreconditioned salt, where initial daily rates were higher and then gradually decreased over time. Furthermore, the molar ratios of nitrite to nitrate ions in the preconditioned salt melts decreased and eventually stabilized at equilibrium states under these maximum operating temperatures. The equilibrium concentrations in the preconditioned melts approached those of the unpreconditioned melts, where nitrite/nitrate ratios increased and eventually stabilized. During the decomposition of both preconditioned and unpreconditioned melts, oxide formation gradually increased but did not reach an equilibrium state. However, the preconditioned melts exhibited lower rate constants at temperatures of 480 °C and 510 °C over time. The onset of melting temperature, initially recorded at 211 °C for the preconditioned 480 and 510 °C melts, gradually increased as the nitrite/nitrate ratios decreased over time, ultimately achieving stability. In contrast, the unpreconditioned 480 and 510 °C melts experienced a gradual decline from 221 °C in their melting points until they reached equilibrium. In , the preliminary treatment of Solar Salt at temperatures exceeding the maximum operation temperatures serves to eliminate impurities and enhance the stability of the molten salt. This preparatory step is essential when using molten nitrate salt as a medium for transferring thermal energy from the sodium cooling loops to the steam generation process in nuclear power plants with thermal energy storage.

Exploration of Chloride Ion Impurities on Solid-Liquid-vapor Phase Diagram and Thermal Performance of Nitrate Molten Salts

Influences of impurity Cl− on the thermal performance of solar salt for thermal energy storage

Electrochemical Study on the Impact of Nacl Impurity on Corrosion of Stainless Steel 316l in Molten Nitrate Salts for Thermal Energy Storage

Impact of NaCl impurity on corrosion of 316 L steel in molten nitrate salts for thermal energy storage: An electrochemical study

Thermal Stability Calculation and Experimental Investigation of Common Binary Chloride Molten Salts Applied in Concentrating Solar Power Plants

Phase diagram thermodynamic calculation of KNO3-NaNO2-KNO2 ternary system molten salt and its thermophysical properties investigation for thermal energy storage

A deep potential molecular dynamics study on the ionic structure and transport properties of NaCl-CaCl2 molten salt

Thermal and Transport Properties of Molten Chloride Salts with Polarization Effect on Microstructure

Stabilization of molten salt materials using metal chlorides for solar thermal storage

Study on the preparation and thermal properties of binary mixed chloride salts

New Insights into the Heat Capacity Enhancement of Nano-Sio2 Doped Alkali Metal Chloride Molten Salt for Thermal Energy Storage: A Molecular Dynamics Study

Enhancements in thermal properties of binary alkali chloride salt by Al 2 O 3 nanoparticles for thermal energy storage

Investigation on thermal performance of eutectic binary nitrate-carbonate molten salt under thermal shock condition

Experimental Study On Thermal Performance Of Mixed Nitrate And Carbonate Salts

New insights into the heat capacity enhancement of nano-SiO 2 doped alkali metal chloride molten salt for thermal energy storage: A molecular dynamics study

Effect of pre-heating on thermal stability of molten nitrate salt

Investigation on thermal performance of quinary nitrate/nitrite mixed molten salts with low melting point for thermal energy storage

Thermal properties of KCl–MgCl2 eutectic salt for high-temperature heat transfer and thermal storage system

Ab initio molecular dynamics assessment of thermodynamic and transport properties in (K,Li)Cl and (K, Na)Cl molten salt mixtures

High temperature (35)Cl nuclear magnetic resonance study of the LiCl-KCl system and the effect of CeCl3 dissolution

Performance Design of High-Temperature Chloride Salts as Thermal Energy Storage Material