Abstract:Ellipsoidal and torispherical heads, whose geometric shapes are close, are usually used as end closures of internally pressurized vessels. In pressure vessel codes, for example, ASME BPVC Section VIII, ellipsoidal heads are designed as torispherical heads using geometric equivalency approaches. However, the difference between ellipsoidal and equivalent torispherical heads has not been studied in detail. In this paper, we first investigate the shape deviation between the two types of heads. Then we compare the elasticplastic behaviors between ellipsoidal and equivalent torispherical heads as well as their failure modes, i.e., buckling and plastic collapse. It is found that ellipsoidal heads have more buckling resistance than equivalent torispherical heads, indicating that the current design rules for buckling failure based on the geometric equivalency approaches result in uneconomical design. Nevertheless, the shape deviation has little effect on plastic collapse pressures of ellipsoidal and equivalent torispherical heads, showing that the geometric equivalency approaches are applicablefor such heads thatfail by plastic collapse (bursting). In addition, the experimental and numerical results show that such heads experience geometric strengthening. The FE method considering the effect of geometric strengthening provides a good prediction about plastic collapse (bursting) pressure. However, the current design equation for bursting does not consider the effect ofgeometric strengthening, also leading to uneconomical design. Therefore, in order to avoid uneconomical design, we recommend that (1) with respect to the buckling of ellipsoidal heads, a new design equation be proposed rather than implementing the geometric equivalency approaches, and (2) the current design equation for bursting be deleted, and a new design equation, considering the effect of geometric strengthening, be proposed for the bursting of ellipsoidal and torispherical heads subjected to internal pressure.

Method for Shape Imperfection Control in Buckling of Ellipsoidal Heads Using a 3D Laser Scanner

An Imperfection Measurement System for Thin-Shell Structures Based on a Laser Displacement Meter

Effect of Shape Imperfection on the Buckling of Large-Scale Thin-Walled Ellipsoidal Head in Steel Nuclear Containment

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Comparison of design methods for internally pressurized ellipsoidal head

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Buckling Behavior of Large-Scale Thin-Walled Ellipsoidal Head under Internal Pressure

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

A new formula to predict buckling pressure of steel ellipsoidal head under internal pressure

Creating Geometric Imperfections in Thin-Walled Structures using Acoustic Excitation

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Investigation on the Plastic Deformation During the Stamping of Ellipsoidal Heads for Pressure Vessels

COMPARISON OF ELLIPSOIDAL AND EQUIVALENT TORISPHERICAL HEADS UNDER INTERNAL PRESSURE: BUCKLING, PLASTIC COLLAPSE AND DESIGN RULES

The Influence of Initial Geometric Imperfection on the Localized Buckling of Pressure Vessel under Internal Pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling of composite cylindrical shells with ovality and thickness variation subjected to hydrostatic pressure

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks