Abstract:Over the last decades, notable progress is achieved in (K, Na)NbO3 (KNN)-based lead-free piezoceramics. However, more studies are conducted to increase its piezoelectric charge coefficient (d33). For actuator applications, piezoceramics need high electric-field induced strain under low electric fields while maintaining exceptional temperature stability across a wide temperature range. In this study, this work developes Li/Sb-codoped KNN (LKNNS) ceramics with high electrostrain by defect engineering and domain engineering. A remarkable strain of 0.43%, along with a giant d33* value of 2177 pm V-1, is attained in the LKNNS ceramic at 20 kV cm-1. The ceramic exhibits a minimal performance decrease of less than 15% over a temperature range from room temperature to 150 °C. The exceptional strain is attributed to the presence of A-site vacancy-oxygen vacancy ( V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ ) defect dipoles and the increase in nano-domains. The hierarchical domain configuration and V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ defect dipoles impede the switched domains from reverting to their original state as temperature increases, furthermore, the elongated dipole moments of V A ' - V O • • ${\mathrm{V}}_{\mathrm{A}}^{{\prime}}{\mathrm{ - V}}_{\mathrm{O}}^{{\mathrm{ \bullet \bullet }}}$ caused by rising temperatures compensate for strain reduction results in exceptional temperature stability. This study provides a model for designing piezoelectric materials with exceptional overall performance under low electric fields and across a wide temperature range.

Hardening of K0.5Na0.5NbO3 Piezoceramics with Cu and the Temperature Dependence in High-Power Drive

Microstructure, electrical properties and processing dependence of CuO modified (Na0 52K0.48)NbO3 ceramics

Microstructure and Piezoelectric Properties of CuO-doped 0.95(k0.5na0.5)nbo3–0.05li(nb0.5sb0.5)o3 Lead-Free Ceramics

Mitigation Of Thermal And Fatigue Behavior In K0.5na0.5nbo3-Based Lead Free Piezoceramics

Textured Potassium Sodium Niobate Lead-Free Ceramics with High d33 and Qm for Meeting High-Power Applications

Modulation of defects and electrical behaviors of Cu-doped KNN ceramics by fluorine-oxygen substitution.

High Temperature-Insensitive Electrostrain Obtained in (K, Na)NbO3-Based Lead-Free Piezoceramics

A high temperature stable piezoelectric strain of KNN-based ceramics

Characterization of Hard Piezoelectric Lead-Free Ceramics.

The structural origin of enhanced piezoelectric performance and stability in lead free ceramics

The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO

Niobate-based lead-free piezoceramics: a diffused phase transition boundary leading to temperature-insensitive high piezoelectric voltage coefficients

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere

Simultaneously Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics Via Defect Design

Composition-driven Phase Transition and Structural Origin of High Piezoresponse in KNN-based Ceramics

Piezoelectric Properties and Temperature Sensitivity for CaZrO3 Doped KNN-based Ceramics Sintered in Reducing Atmosphere

Compositional Inhomogeneity and Segregation in (k0.5na0.5)nbo3 Ceramics

Influence of MnO2 Doping on the Dielectric and Piezoelectric Properties and the Domain Structure in (k0.5na0.5)nbo3 Single Crystals

Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere

Role of ZnO dopant in enhancing piezoelectric characteristics in KNN‐based piezoelectric ceramics

(K,na)nbo3‐based Ceramics for Piezoelectric “hard”lead‐free Materials