An Energy Efficient Amplifier with a Closed Loop Gm-Boosting Output Stage for Large Capacitive Loads Achieving 686,685 MHz▪pF/mA IFoMs

Zhenan Xu,Shuang Song,Dehong Wang,Mengyu Li,Qiuyang Lin,Mingsheng Xu,Wanyuan Qu,Zhichao Tan,Menglian Zhao
DOI: https://doi.org/10.1109/esserc62670.2024.10719574
2024-01-01
Abstract:This paper proposed a low-power two-stage amplifier for large capacitive load driving. A closed-loop gmboosted (CLGB) output stage is exploited to reduce the output resistance and thus makes the output pole non-dominant. This allows an internally defined dominant pole, resulting in a high gain-bandwidth (GBW) without using compensation capacitor. Meanwhile, a current-reuse stacked (CRS) slew rate (SR) enhancement circuit is implemented to increase the current driving capability. This circuit reuses the quiescent current $\left(I_{Q}\right)$ and leverages a signal-dependent positive feedback of cross-coupled pair to enlarge the enhancing current. The proposed amplifier is fabricated in a standard 55 nm CMOS technology, with an active area of $0.006 \mathrm{~mm}^{2}$. It achieves a bandwidth of 1.03 MHz at $12 \mathrm{nF} C_{\mathrm{L}}$, reaching an IFoMs of 686,685 that advances the state-of-the art by X1.8. It provides an SR of $\mathbf{0. 0 9}$ $\mathrm{V} / \mu \mathrm{s}$ with a 12 nF load, reaching an $\mathrm{LC}-\mathrm{FoMs}$ of 2080,845, which exceeds the state-of-the art by more than X 4. The excellent GBW and SR with an $I_{Q}$ of only $18 \mu \mathrm{~A}$ makes the proposed amplifier suitable for large capacitance driving applications.
What problem does this paper attempt to address?