A 20.3$\mu $W 1.9G$\Omega $ Input Impedance Capacitively-Coupled Chopper-Stabilized Amplifier for Bio-Potential Readout
Yizhao Zhou,Shuang Song,Yu Zheng,Tian Yang,Mengyu Li,Yipeng Cao,Feijun Zheng,Kai Huang,Zhichao Tan,Menglian Zhao
DOI: https://doi.org/10.1109/tcsi.2024.3351872
2024-01-01
Abstract:This paper presents a low-power chopper-stabilized capacitively-coupled frontend amplifier with auxiliary-path-based input impedance ( ${Z} _{\mathbf {in}}$ ) boosting. In order to achieve a high ${Z} _{\mathbf {in}}$ , a low noise and a small chip area, techniques on both system level and circuit level are implemented. On the system level, small capacitors ( ${C} _{\mathbf {in}}$ = 0.5 pF, ${C} _{\mathbf {fb}}$ = 25 fF) are used with a biased pseudo-resistor ( ${R}$ = 2.5 $\text{G}\Omega $ ) fed back to an amplifier internal node. As a result, a high achievable ${Z} _{\mathbf {in}}$ and low high-pass corner frequency are achieved. On the circuit level, an input capacitance shielded current feedback (CSCF) topology achieving effective 10 fF ${C} _{\mathbf {amp}}$ is proposed as the core of the capacitive feedback amplifier in order not to increase the input noise. Moreover, the design space of auxiliary-path-based boosting is explored to obtain the optimal value of buffer bandwidth and auxiliary capacitor size to save power. The amplifier and its ${Z} _{\mathbf {in}}$ boosting circuit are implemented in a standard 55 nm CMOS process and characterized experimentally. Measurement results show that the proposed amplifier provides an input noise density of 50 nV/ $\surd $ Hz, and an integrated noise of $0.85~\mu $ Vrms in 200 Hz band. The ${Z} _{\mathbf {in}}$ is boosted to 1.92 $\text{G}\Omega $ at DC and 1.02 $\text{G}\Omega $ at 50 Hz with only $1.0~\mu \text{A}$ in each auxiliary path buffer. The amplifier also archives 77 dB CMRR and 76 dB PSRR while consuming $20.3~\mu \text{W}$ in total.
engineering, electrical & electronic