Abstract:Lithium–sulfur (Li–S) batteries have a high theoretical specific energy; however, their performance is plagued by the shuttle effect of lithium polysulfides and the instability of the lithium anode interface. Great efforts have been made using electrolyte additives to address the issues. Herein, we report a class of electrolyte additives, i.e., benzenedithiols (BDTs). Among the three isomers of BDTs, 1,4-BDT shows the best effect on the performance improvement of a Li–S battery because it can bond more sulfur atoms than the other two. The functionality of 1,4-BDT on the cathode and anode involves the chemical reactions of thiol groups. The S–S bonds were generated from 1,4-BDT and sulfur through oligomerization, which change the original redox path of sulfur and inhibit the shuttle effect of lithium polysulfides. In addition, 1,4-BDT can form a smooth and stable solid-electrolyte interphase (SEI), which can enable the Li/Li symmetric cell with an ultralow overpotential of 0.08 V at a high current density of 5 mA cm–2 for over 300 h. The Li–S cell with 1,4-BDT displays the highest cycling stability at a C/5 rate, with an initial capacity of 1548.5 mAh g–1 and a reversible capacity of 1306.9 mAh g–1 after 200 cycles. The Li–S pouch cell with 1,4-BDT and 2.8 g of sulfur exhibits an initial capacity of 2640 mAh and a capacity retention rate of 84.2% after 26 cycles at a C/10 rate. This work demonstrates that organodithiol compounds can be used as functional electrolyte additives and provides a new direction to design materials for advanced Li–S batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.1c04222?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.1c04222</a>.Discussions of experimental details, figures of cycling performance, bar chart of the capacity comparison, capacity retention tendency chart, galvanostatic charge/discharge profiles, mass spectra, long-term cycling performance, cyclic voltammograms, rate performance, Nyquist plots, Raman spectra, SEM images, UV–vis spectra, AFM images, indentation curves, and performance comparison, and tables of assignments of peaks in XPS spectra and comparison of the performances of Li–S batteries with different electrolyte additives (<a class="ext-link" href="/doi/suppl/10.1021/jacs.1c04222/suppl_file/ja1c04222_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Multifunctional Additive for Long-Cycling Lithium-Sulfur Batteries under Lean-Ether-Electrolyte Conditions

Improving the electrochemical performance of lithium-sulfur batteries by interface modification with a bifunctional electrolyte additive

Accelerating Lithium‐Ion Transfer and Sulfur Conversion via Electrolyte Engineering for Ultra‐Stable All‐Solid‐State Lithium–Sulfur Batteries

Organic Electrolyte Additive: Dual Functions Toward Fast Sulfur Conversion and Stable Li Deposition for Advanced Li-S Batteries

Isomeric Organodithiol Additives for Improving Interfacial Chemistry in Rechargeable Li–S Batteries

Ammonium silicofluoride as bifunctional electrolyte additive to regulate the electrode interface in lithium-sulfur battery

Bifunctional Additive Phenyl Vinyl Sulfone for Boosting Cyclability of Lithium Metal Batteries

Stabilization of High-Voltage Lithium Metal Batteries Using a Sulfone-Based Electrolyte with Bi-Electrode Affinity and LiSO2F-rich Interphases

A bifunctional electrolyte additive ammonium hexafluorophosphate for long cycle life lithium-sulfur batteries

Ammonium Additives to Dissolve Lithium Sulfide Through Hydrogen Binding for High-Energy Lithium-Sulfur Batteries

A Micelle Electrolyte Enabled by Fluorinated Ether Additives for Polysulfide Suppression and Li Metal Stabilization in Li-S Battery

A new ether-based medium-concentrated electrolyte for lithium–sulfur battery with lean Li anode

Dual-enhancement on electrochemical performance with thioacetamide as an electrolyte additive for lithium-sulfur batteries

A novel mixed ether-based electrolyte for lithium–sulfur batteries with Li anode protection by dual salts

Bifunctional Fluorinated Anthraquinone Additive for Improving Kinetics and Interfacial Chemistry in Rechargeable Li–S Batteries

Addressing Passivation In Lithium-Sulfur Battery Under Lean Electrolyte Condition

Asymmetrical Functionalization of Polarizable Interface Restructuring Molecules for Rapid and Longer Operative Lithium Metal Batteries

Lithium Sulfur Batteries with Compatible Electrolyte Both for Stable Cathode and Dendrite-Free Anode

A functional additive to in-situ construct stable cathode and anode interfaces for all-solid-state lithium-sulfur batteries

LiPAA with Short‐chain Anion Facilitating Li 2 S x ( x ≤ 4) Reduction in Lean‐electrolyte Lithium–sulfur Battery

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries