Abstract:Decreasing the electrolyte/sulfur ratio is the key to improving the actual energy density of Li–S batteries, but the deterioration of reaction kinetics challenges the sulfur utilization and battery performance. This review discusses the recent progress in reducing electrolyte usage in Li–S batteries and summarizes the strategies to solve lean‐electrolyte‐induced problems. Finally, the perspectives for future research on lean‐electrolyte Li–S batteries are given. Lithium–sulfur (Li–S) batteries have high theoretical energy density and are regarded as next‐generation batteries. However, their practical energy density is much lower than the theoretical value. In previous studies, the increase of the areal capacity of the cathode and the decrease of the negative/positive ratio can be well achieved, yet the energy density shows no corresponding increase. The main reason is the difficulty in decreasing electrolyte dosage because lean electrolyte inevitably causes the deterioration of reaction kinetics and sulfur utilization. Thus, the electrolyte/active material ratio in the reported works is usually higher than 10 μL mg−1, much higher than that in Li‐ion batteries (usually lower than ≈0.3 μL mg−1 for cathode). Although many works have focused on this topic, a systematic discussion is still rare. This review systematically discusses the key challenges and solutions for assembling high‐performance lean‐electrolyte Li–S batteries. First, the key challenges arising from lean‐electrolyte conditions are discussed in detail. Then, the approaches and the recent progress to reduce electrolyte usage, including optimization of electrode porosity and ion conduction, the introduction of electrocatalysis, exploration of new active materials, electrolyte regulation, and Li metal protection are reviewed. Finally, future research directions in lean‐electrolyte Li–S batteries are proposed.

Addressing Passivation In Lithium-Sulfur Battery Under Lean Electrolyte Condition

Lean Electrolyte Batteries: Addressing Passivation in Lithium–Sulfur Battery under Lean Electrolyte Condition (adv. Funct. Mater. 38/2018)

Nanostructured Β-Li3ps4 for All-Solid Lithium-Sulfur Batteries

Ammonium Additives to Dissolve Lithium Sulfide Through Hydrogen Binding for High-Energy Lithium-Sulfur Batteries

A Radical Pathway and Stabilized Li Anode Enabled by Halide Quaternary Ammonium Electrolyte Additives for Lithium‐Sulfur Batteries

Challenges and Solutions for Lithium–Sulfur Batteries with Lean Electrolyte

Minimizing Polysulfide Shuttle Effect in Lithium-Ion Sulfur Batteries by Anode Surface Passivation

Promoted Rate and Cycling Capability of Li–S Batteries Enabled by Targeted Selection of Co-Solvent for the Electrolyte

Catalytic Effect of Ammonium Thiosulfate as a Bifunctional Electrolyte Additive for Regulating Redox Kinetics in Lithium-Sulfur Batteries by Altering the Reaction Pathway

LiPAA with Short‐chain Anion Facilitating Li 2 S x ( x ≤ 4) Reduction in Lean‐electrolyte Lithium–sulfur Battery

A Multifunctional Additive for Long-Cycling Lithium-Sulfur Batteries under Lean-Ether-Electrolyte Conditions

Cathode Kinetics Evaluation in Lean-Electrolyte Lithium-Sulfur Batteries

A lithium-sulfur battery with a solution-mediated pathway operating under lean electrolyte conditions

Boosting High-Performance in Lithium-Sulfur Batteries Via Dilute Electrolyte.

Tailored Reaction Route by Micropore Confinement for Li–S Batteries Operating under Lean Electrolyte Conditions

Improving Lithium-Sulfur Battery Performance under Lean Electrolyte Through Nanoscale Confinement in Soft Swellable Gels.

Boosting Cathode Activity and Anode Stability of Lithium–Sulfur Batteries with Vigorous Iodic Species Triggered by Nitrate

Stability of Li Metal Anode in Li-S Batteries

Sulfone-assisted-NH4I As Electrolyte Additive with Synergistic Dissolution and Catalysis Effects on Reducing the Activation Voltage of Li2S Cathode

Anodes for Rechargeable Lithium‐Sulfur Batteries

Molecular Regulation of Electrolytes for Enhancing Anode Interfacial Stability in Lithium-Sulfur Batteries