Abstract:Lithium-sulfur (Li-S) batteries are a promising candidate for next-generation energy storage owing to the high theoretical capacity of sulfur (1,675 mAh g −1 ). However, the intrinsically low electrical conductivity of sulfur and complex multistep electrolyte-mediated redox reactions involving soluble lithium polysulfide intermediates engender critical challenges toward practical realization. Specifically, migration and diffusion of higher-order lithium polysulfides provokes continuous loss of active sulfur species, yielding premature capacity fade. Electrochemical kinetics also remain sluggish due to the insulating nature of sulfur cathodes, which require engineering designs to accelerate charge transfer. Rational morphological and compositional cathode tuning represents a compelling strategy for addressing fundamental Li-S limitations. Herein, we develop an extended cathode architecture composed of a porous carbon nanotube network decorated with homogenously dispersed nanocatalysts. Electron microscopy and spectroscopy analysis verify platinum group metals are well-incorporated both within internal channels and external surface sites of conductive carbon nanotubes. The composite framework affords multifaceted functionality arising from synergistic chemical and structural attributes of components. Nanocatalyst sites demonstrate a pronounced chemical affinity toward soluble polysulfide intermediates, effectively localizing them within cathode, minimizing diffusional losses toward the anode. This anchoring phenomenon is complemented by the inherent microporosity of the high-surface-area nanotube network, further obstructing polysulfide migration through a confinement effects. Concurrently, noble metal nanoparticles facilitate the redox conversion of trapped higher-order polysulfides into solid Li 2 S alleviating the precipitation of electrically insulating discharge products. The excellent electrical conductivity of CNTs ensures efficient charge transport to all incorporated sulfur active materials, further maximizing reversible utilization. As a result of complementary polysulfide confinement and electrocatalytic conversion functionalities, Li-S coin cells exhibit enhanced reversible capacities exceeding 900 mAh g −1 for over 500 cycles at 0.558 A g −1 . Notably, over 500 cycles, minimal capacity decay of 0.018% per cycle and 92% retention of the initial capacity are obtained at moderate sulfur loadings highlighting the exceptional cycling stability enabled by engineered cathodes. Outstanding rate performance is also demonstrated with the delivery of 854 mAh g −1 capacity at a very high current density of 1.675 A g −1 . Our rationally designed cathode architecture provides critical mechanistic insight toward addressing fundamental bottlenecks to progress Li-S technologies.

Lithium Sulfur Batteries with Compatible Electrolyte Both for Stable Cathode and Dendrite-Free Anode

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Nanostructured Β-Li3ps4 for All-Solid Lithium-Sulfur Batteries

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries

A Compatible Carbonate Electrolyte with Lithium Anode for High Performance Lithium Sulfur Battery

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Sulfone-Based Electrolytes for Highly-Efficient and Stable Lithium Metal Anode

Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium-Sulfur Batteries.

Regulating and Understanding the Compatibility of Sulfide Composite Solid-State Electrolyte in Nickel-Rich Lithium Metal Batteries

Tunable Electrolyte/Electrode and Electrolyte/Membrane Interfaces for Li-S Battery with High Capacity and Good Stability

Simultaneous Suppression of the Dendrite Formation and Shuttle Effect in a Lithium–Sulfur Battery by Bilateral Solid Electrolyte Interface

High-Rate and Long-Term Cycle Stability of Li-S Batteries Enabled by Li2S/TiO2-Impregnated Hollow Carbon Nanofiber Cathodes.

Fluorinated Co-Solvent Promises Li-S Batteries under Lean-Electrolyte Conditions

A Chemically Stabilized Sulfur Cathode for Lean Electrolyte Lithium Sulfur Batteries

A lithium-sulfur battery with a solution-mediated pathway operating under lean electrolyte conditions

High-Performance Lithium–Sulfur Batteries with a Cost-Effective Carbon Paper Electrode and High Sulfur-Loading

A Long-Life, High-Rate Lithium/sulfur Cell: a Multifaceted Approach to Enhancing Cell Performance.

A Diluted Electrolyte for Long-Life Sulfurized Polyacrylonitrile-Based Anode-Free Li-S Batteries

Lithium Polysulfide-Based Electrolytes for Li Metal Anodes

Flexible and Self-Supported Sulfur Cathode for High-Energy-Density Lithium-Sulfur Batteries

Engineering Peculiar Cathode Electrolyte Interphase toward Sustainable and High‐Rate Li–S Batteries