Abstract:There is no consensus about the optimal internal fixation selection for treatment of posterolateral tibial plateau fracture. This study described a novel plate through an anterolateral approach for posterolateral tibial plateau fractures (PTPFs). We evaluated the biomechanical performance of a novel plate and two conventional internal implants and investigated the anatomic feasibility of the novel plate. The fracture models were randomly assigned into six groups: Groups A–C were the model groups of posterolateral split fracture, fixed with the posterior buttress plate, the lateral locking plate, and the novel plate, respectively. Groups D–E were the model groups of posterolateral depression fracture, fixed with the posterior buttress plate, the lateral locking plate, and the novel plate, respectively. We evaluated the biomechanical performance of six model groups by the biomechanical testing and finite element analysis. Progressively increasing axial compressive loads were applied to each synthetic fracture model by using a customized indentor under 250–750 N loads. Meanwhile, we dissected 12 fresh frozen knee specimens and fixed them with the novel plate through the anterolateral approach. We recorded the adjacency of the novel plate to important anatomic structures. Biomechanical testing showed that the novel plate had the least displacement, followed by the posterior buttress plate, and the lateral plate had the most displacement in posterolateral split fracture. There was no significant difference in the displacement between the novel plate and the lateral plate at different loads in posterolateral depression fractures. And the posterior buttress plate showed the most displacement. In the finite element analysis, the maximum stress values of Groups A, B, and C were 383.76, 414.63, and 305.07 MPa under the load of 750 N, respectively. The maximum stress values of Groups D, E, and F were 474.28, 436.31, and 413.4 MPa under the load of 750 N, respectively. In the anatomic study, the placement of the novel plate had a low risk of damage to the important anatomic structures of knee posterolateral corner. The novel plate could be a great choice for the treatment of PTPFs due to better biomechanical performance and easy manipulation.

Biomechanical Study of Plate Fixation for Femoral Shaft Fracture

Finite element analysis of a novel anatomical plate in posterolateral plateau fractures

Biomechanical testing of a computationally optimized far cortical locking plate versus traditional implants for distal femur fracture repair

BIOMECHANIC STUDY ON LENGTH OF PLATE IN TREATMENT OF TIBIAL SHAFT FRACTURE

Biomechanical Evaluation of Internal Fixation with Mono-Cortical Bone Plate and Screw

Biomechanical analysis of posteromedial tibial plateau split fracture fixation.

Biomechanical Comparison and Clinical Analysis of Three Different Fixation Methods for Medial Surface and Paries Posterior of Tibial Plateau Fracture

Mechanical evaluation for the finite element analysis of intramedullary nailing and plate screw system used in humerus transverse fractures

Periprosthetic fracture fixation in Vancouver B1 femoral shaft fractures: A biomechanical study comparing two plate systems

Computational analysis of the biomechanical stability of internal fixation of the lateral tibial plateau fracture: A mechanical stability study

Parametric study of patient-specific femoral locking plates based on a combined musculoskeletal multibody dynamics and finite element modeling

Biomechanical Comparison of Fixation Systems in Posterior Wall Fracture of Acetabular by Finite Element Analysis

The Study of Biomechanics and Clinical Anatomy on a Novel Plate Designed for Posterolateral Tibial Plateau Fractures via Anterolateral Approach

Finite Element Analysis of Allogeneic Bone Plates Combined with Different Screw in the Treatrment of Femoral Shaft Fractures

The biomechanics of plate fixation of periprosthetic femoral fractures near the tip of a total hip implant: cables, screws, or both?

Comprehensive biomechanical analysis of three clinically used fixation constructs for posterior malleolar fractures using cadaveric and finite element analysis

Screw and plate fixation for fractures of tibial shaft: three-dimensional finite element analysis

Biomechanical analysis of internal fixation system stability for tibial plateau fractures

Biomechanical superiority of locking plate designed with cluster of head screws compared to conventional buttress plate for fixation of posteromedial tibial plateau fractures: A computational assessment

Newly designed plate for the treatment of posterolateral tibial plateau fractures: a finite element analysis

The biomechanics of plate repair of periprosthetic femur fractures near the tip of a total hip implant: the effect of cable-screw position