Abstract:The presence of residual stresses in materials or engineering structures can significantly influence their mechanical performance. Accurate measurement of residual stresses is of great importance to ensure their in-service reliability. Although numerous instrumented indentation methods have been proposed to evaluate residual stresses, the majority of them require a stress-free reference sample as a comparison benchmark, thereby limiting their applicability in scenarios where obtaining stress-free reference samples is challenging. In this work, through a number of finite element simulations, it was found that the loading exponent of the loading load-depth curve and the recovered depth during unloading are insensitive to residual stresses. The loading curve of the stress-free specimen was virtually reconstructed using such stress-insensitive parameters extracted from the load-depth curves of the stressed state, thus eliminating the requirement for stress-free reference samples. The residual stress was then correlated with the fractional change in loading work between stressed and stress-free loading curves through dimensional analysis and finite element simulations. Based on this correlation, an instrumented sharp indentation method for measuring equibiaxial residual stress without requiring a stress-free specimen was established. Both numerical and experimental verifications were carried out to demonstrate the accuracy and reliability of the newly proposed method. The maximum relative error and absolute error in measured residual stresses are typically within ± 20

An Instrumented Sharp Indentation Method for Measuring Equibiaxial Residual Stress Without Using Stress-Free Specimens

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Evaluation of Non-Equibiaxial Residual Stresses in Metallic Materials via Instrumented Spherical Indentation

Biaxial Residual Stress Measurement by Indentation Energy Difference Method: Theoretical and Experimental Study

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Investigation of Residual Stress by the Indentation Method with the Flat Cylindrical Indenter

Novel method for measuring surface residual stress using flat-ended cylindrical indentation

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously

Residual Stress Measurement Via Digital Image Correlation and Sharp Indentation Testing

Research Progress on Surface Residual Stress Measurement Using Instrumented Indentation

Determination of Residual Stress and Yield Stress Simultaneously by Indentation Method with Dual Indenters

A novel model to obtain equi-biaxial residual stress of metallic materials via instrumented spherical indentation

Influence of Equi-Biaxial Residual Stress on Spherical Indentation of Strain Hardening Materials

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

Determination of Biaxial Residual Stresses Via Indentation Energy Difference Method

An approach for obtaining surface residual stress based on indentation test and strain measurement

Nondestructive testing method of residual stresses in metallic materials based on Knoop indentation technique

An Indentation Method for Measuring Welding Residual Stress: Estimation of Stress-Free Indentation Curve Using BP Neural Network Prediction Model

Prediction of Residual Stress Components and Their Directions from Pile-Up Morphology: an Experimental Study