Abstract:The presence of residual stresses in materials or engineering structures can significantly influence their mechanical performance. Accurate measurement of residual stresses is of great importance to ensure their in-service reliability. Although numerous instrumented indentation methods have been proposed to evaluate residual stresses, the majority of them require a stress-free reference sample as a comparison benchmark, thereby limiting their applicability in scenarios where obtaining stress-free reference samples is challenging. In this work, through a number of finite element simulations, it was found that the loading exponent of the loading load-depth curve and the recovered depth during unloading are insensitive to residual stresses. The loading curve of the stress-free specimen was virtually reconstructed using such stress-insensitive parameters extracted from the load-depth curves of the stressed state, thus eliminating the requirement for stress-free reference samples. The residual stress was then correlated with the fractional change in loading work between stressed and stress-free loading curves through dimensional analysis and finite element simulations. Based on this correlation, an instrumented sharp indentation method for measuring equibiaxial residual stress without requiring a stress-free specimen was established. Both numerical and experimental verifications were carried out to demonstrate the accuracy and reliability of the newly proposed method. The maximum relative error and absolute error in measured residual stresses are typically within ± 20

Determination of Residual Stress and Yield Stress Simultaneously by Indentation Method with Dual Indenters

Investigation of Residual Stress by the Indentation Method with the Flat Cylindrical Indenter

A Reverse Numerical Approach to Determine Elastic-plastic Properties of Multi-layer Material Systems with Flat Cylindrical Indenters

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Determination of Biaxial Residual Stresses Via Indentation Energy Difference Method

Determining plastic properties of a material with residual stress by using conical indentation

A novel method for determining surface residual stress components and their directions in spherical indentation

Biaxial Residual Stress Measurement by Indentation Energy Difference Method: Theoretical and Experimental Study

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously

An Instrumented Sharp Indentation Method for Measuring Equibiaxial Residual Stress Without Using Stress-Free Specimens

Determination of the Elastic-plastic Properties of Thin-film Substrate System by the Indentation Testing with the Fiat Indenter

Finite Element Analysis of the Indentation Stress Characteristics of the Thin Film/Substrate Systems by Flat Cylindrical Indenters

Influence of Equi-Biaxial Residual Stress on Spherical Indentation of Strain Hardening Materials

Study of the Ratcheting by the Indentation Fatigue Method with a Flat Cylindrical Indenter: Part I. Experimental Study

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

A New Method for Measuring Residual Stress Relaxation During Nanoindentation

On the Determination of Representative Stress–strain Relation of Metallic Materials Using Instrumented Indentation

Research Progress on Surface Residual Stress Measurement Using Instrumented Indentation

A Numerical Study of Indentation Creep Using Indenters of Different Geometry

A New Method to Determine Material Creep Parameters Based Flat Cylindrical Indentation Test

Investigation of Creep Stress Characterization of Thin Film/Substrate Systems with Indentation Method