Abstract:Thanks to the need for refinement in the mold field, high-precision laser powder bed fusion (HP-LPBF) has become a critical technique for manufacturing new high-precision molds. The influence of HP-LPBF process parameters for densification of 18Ni300 maraging steel (MS18Ni300), as well as the related optical micrograph (OM), microstructure, phase composition, and mechanical properties of optimal relative density specimens, were comprehensively examined in this study. The sequence of HP-LPBF process parameters on the relative density of the specimens was investigated using the orthogonal experimental method. With a relative density of 99.18 ± 0.11 % and a surface roughness of 3.59 ± 0.32 μm, the optimal process parameters was attained. The influence of adding SiC on the specimens' OM, microstructure, phase composition, and mechanical properties were compared and studied. The results show that the building direction (BD) is the dominant heat flow direction in HP-LPBF by EBSD analysis and that the rotating 67° scanning strategy can effectively improve the isotropy of the mechanical properties of HP-LPBF parts. The MS18Ni300 specimen has a particularly thin cellular microstructures with a diameter of 6.11 μm. In addition, the dominant phase composition of the MS18Ni300 specimen was martensite (α). The microstructure of SiC (volume fraction of 1 %)/MS18Ni300 (M1) composites was significantly refined, and changes in the microstructure were primarily due to SiC's physical properties. The addition of SiC particles leads to a weakening of the preferred crystallographic orientation of the grains. The average grain size was 3.21 μm. No new phases were produced, but the mechanical properties were improved. The ultimate tensile strength and hardness of M1 were 1.33 GPa and 390.2 HV, respectively. The strengthening mechanism of SiC was discussed.

Laser Powder Bed Fusion of SiC Particle-Reinforced Pre-Alloyed TiB2/AlSi10Mg Composite with High-Strength and High-Stiffness

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB2 co-reinforced Al-Zn-Mg-Cu composites

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

Process Optimization of SiC-Reinforced Aluminum Matrix Composites Prepared Using Laser Powder Bed Fusion and the Effect of Particle Morphology on Performance

Microstructure and mechanical properties of TiB 2 /Al-5Cu composites fabricated by multi-material laser powder bed fusion

Influence of SiC Particles on the Microstructure and Mechanical Behaviors of AlMgScZr Alloy Processed by Laser Powder Bed Fusion

Laser Powder Bed Fusion of Oxidized Microscale SiC-particle-reinforced AlSi10Mg Matrix Composites: Microstructure, Porosity, and Mechanical Properties

Laser Powder Bed Fusion Of Mo2c/Ti-6al-4v Composites With Alternately Laminated Alpha '/Beta Phases For Enhanced Mechanical Properties

Synergistic Strengthening Mechanisms of Dual-Phase (TiN+AlN) Reinforced Aluminum Matrix Composites Prepared by Laser Powder Bed Fusion

Laser powder bed fusion of Mo2C/Ti-6Al-4V composites with alternately laminated α′/β phases for enhanced mechanical properties

Achieving Excellent Strength of the LPBF Additively Manufactured Al-Cu-Mg Composite Via In-Situ Mixing TiB2 and Solution Treatment

High-precision laser powder bed fusion of 18Ni300 maraging steel and its SiC reinforcement composite materials

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Microstructure evolution and mechanical properties of selective laser melting fabricated hybrid particle reinforced AlSi10Mg composites

Selective laser melting of TiB<sub>2</sub>/AlSi10Mg composite: Processability, microstructure and fracture behavior

Selective laser melting of TiB2/AlSi10Mg composite: Processability, microstructure and fracture behavior

Laser Powder Bed Fusion of an Ultrafine Microstructural In-Situ TiB2/Al Composite with Excellent Mechanical Properties and Thermal Stability at Elevated Temperatures

In-situ formation Ti-Al-C compounds reinforced SiCp/2A14 Al joint: Microstructure evolution and mechanical properties

Tailoring the Enhanced Mechanical Behavior of 6061al Composites Via Nano SiCp and Micron B4Cp Addition

New Insights into the Microstructural Evolution and Properties of (Tib+tic)/ti-6Al-4v Composite Via Laser Directed Energy Deposition Using B4C Nanoparticles

Fabrication and characterization of SiC/Al composites prepared by laser powder bed fusion (LPBF) combined with vacuum pressure infiltration