Abstract:As a clean energy carrier, hydrogen has priority in decarbonization to build sustainable and carbon-neutral economies due to its high energy density and no pollutant emission upon combustion. Electrochemical water splitting driven by renewable electricity to produce green hydrogen with high-purity has been considered to be a promising technology. Unfortunately, the reaction of water electrolysis always requires a large excess potential, let alone the large-scale application (e.g., >500 mA cm-2 needs a cell voltage range of 1.8-2.4 V). Thus, developing cost-effective and robust transition metal electrocatalysts working at high current density is imperative and urgent for industrial electrocatalytic water splitting. In this review, the strategies and requirements for the design of self-supported electrocatalysts are summarized and discussed. Subsequently, the fundamental mechanisms of water electrolysis (OER or HER) are analyzed, and the required important evaluation parameters, relevant testing conditions and potential conversion in exploring electrocatalysts working at high current density are also introduced. Specifically, recent progress in the engineering of self-supported transition metal-based electrocatalysts for either HER or OER, as well as overall water splitting (OWS), including oxides, hydroxides, phosphides, sulfides, nitrides and alloys applied in the alkaline electrolyte at large current density condition is highlighted in detail, focusing on current advances in the nanostructure design, controllable fabrication and mechanistic understanding for enhancing the electrocatalytic performance. Finally, remaining challenges and outlooks for constructing self-supported transition metal electrocatalysts working at large current density are proposed. It is expected to give guidance and inspiration to rationally design and prepare these electrocatalysts for practical applications, and thus further promote the practical production of hydrogen via electrochemical water splitting.

NiFe-based Electrocatalysts Toward High-Current–density Overall Water Electrolysis

NiFe‐Based Electrocatalysts for Alkaline Oxygen Evolution: Challenges, Strategies, and Advances Toward Industrial‐Scale Deployment

Boosting High-Current Water Electrolysis: Superhydrophilic/superaerophobic Nanosheet Arrays of NiFe LDH with Oxygen Vacancies in Situ Grown on Iron Foam

NiFe Hydroxide Supported on Hierarchically Porous Nickel Mesh As a High-Performance Bifunctional Electrocatalyst for Water Splitting at Large Current Density

A Highly Efficient Fe-doped Ni3S2 Electrocatalyst for Overall Water Splitting

Ultrastable NiFeOOH/NiFe/Ni electrocatalysts prepared by in-situ electro-oxidation for oxygen evolution reaction at large current density

Heterointerface Engineered NiFe(OH)x/Ni3S2 Electrocatalysts to Overcome the Scaling Relationship for Ultrahigh-Current-density Water Oxidation

Ultrahigh‐Current‐Density and Long‐Term‐Durability Electrocatalysts for Water Splitting

Fe‐Doped Ni3S2 Nanowires with Surface‐Restricted Oxidation Toward High‐Current‐Density Overall Water Splitting

Self-supported NiFe-LDH Nanosheets on NiMo-based Nanorods As High-Performance Bifunctional Electrocatalysts for Overall Water Splitting at Industrial-Level Current Densities

Recent progress of Ni-based nanomaterials for the electrocatalytic oxygen evolution reaction at large current density

Self-supported crystalline-amorphous composites of metal phosphate and NiS for high-performance water electrolysis under industrial conditions

Highly efficient sulfur-doped Ni3Fe electrocatalysts for overall water splitting: Rapid synthesis, mechanism and driven by sustainable energy

Fabrication of Ni/NiFe-LDH Core–Shell Schottky Heterojunction as Ultrastable Bifunctional Electrocatalyst for Ampere-Level Current Density Water Splitting

Nitrogen-doped Fe<sub>2</sub>O<sub>3</sub>/NiTe<sub>2</sub> as an excellent bifunctional electrocatalyst for overall water splitting

Anionic phosphorous and sulfur regulate self-supported Ni-Fe-based electrocatalyst for water-splitting under large current density

Transition metal-based catalysts for electrochemical water splitting at high current density: current status and perspectives

Nitrogen-doped Fe2O3/NiTe2 as an excellent bifunctional electrocatalyst for overall water splitting

Electrochemical synthesis of trimetallic nickel-iron-copper nanoparticles via potential-cycling for high current density anion exchange membrane water-splitting applications

Self‐Supported Fe‐Based Nanostructured Electrocatalysts for Water Splitting and Selective Oxidation Reactions: Past, Present, and Future

Hydrogen production by traditional and novel alkaline water electrolysis on nickel or iron based electrocatalysts.