Abstract:This article discusses the use of the dynamic hydrogen bubble template (DHBT) technique for in situ electrodeposition and simultaneous formation of NiCoMn trimetallic alloy nanosheets on nickel foam (NF). Compared to Ni/NF metallic and NiCo/NF, NiMn/NF, and CoMn/NF bimetallic electrodes, the NiCoMn/NF trimetallic alloy electrocatalyst exhibited favorable activity and durability. It provides current densities of −10, −100, −500, and −1000 mA cm −2 at overpotentials of −33, −131, −168, and −242 mV, respectively, and shows a Tafel slope of 44.2 mV dec −1 . Additionally, the NiCoMn/NF electrode can maintain its stability without significant degradation in the morphology, while delivering a high current density for the HER (−500 mA cm −2 at 150 h). Utilizing a NiCoMn/NF‖NiCoMn/NF pair in a water splitting setup achieved an activation potential of 1.43 V at 10 mA cm −2 current density. Furthermore, the NiCoMn/NF‖NiCoMn/NF couple can withstand a 300 h chronopotentiometry test to provide a current density of 100 mA cm −2 with high durability. In situ and simultaneous synthesis with a fast, simple, and low-cost technique, the special morphology, the high synergy between Ni, Co, and Mn elements, and the superhydrophobic properties and extensive electrochemically active surface area with an ability to provide high current density are key advantages of the NiCoMn/NF electrocatalyst. Our quantum chemical calculations using density functional theory (DFT) revealed the synergistic role of Co and Mn in enhancing the efficiency of water splitting. Specifically, Co atoms significantly increase the conductivity, while Mn atoms, identified as the most reactive sites, primarily drive the HER, followed by Co and then Ni. This synergy between Co and Mn is crucial for optimizing catalytic performance in water splitting. These features add to the importance of its industrial usage for the sustainable development of hydrogen energy.

Electrochemical synthesis of trimetallic nickel-iron-copper nanoparticles via potential-cycling for high current density anion exchange membrane water-splitting applications

Stabilized Hydroxide Mediated Nickel-Based Electrocatalysts for High Current Density Hydrogen Evolution in Alkaline Media

Self-Supported Bimetallic Phosphide Heterojunction-Integrated Electrode Promoting High-Performance Alkaline Anion-Exchange Membrane Water Electrolysis

NiFe Hydroxide Supported on Hierarchically Porous Nickel Mesh As a High-Performance Bifunctional Electrocatalyst for Water Splitting at Large Current Density

Electrical Behavior and Electron Transfer Modulation of Nickel–Copper Nanoalloys Confined in Nickel–Copper Nitrides Nanowires Array Encapsulated in Nitrogen‐Doped Carbon Framework As Robust Bifunctional Electrocatalyst for Overall Water Splitting

A low‐cost Ni‐Mo electrocatalyst for highly efficient hydrogen and oxygen evolution reaction

NiFe-based Electrocatalysts Toward High-Current–density Overall Water Electrolysis

One-step electrodeposition synthesis of NiFePS on carbon cloth as self-supported electrodes for electrochemical overall water splitting

An efficient Ni3S2–Ni electrode constructed by a one-step powder metallurgy approach for the hydrogen evolution reaction

One-step electrosynthesis of NiFe-NF electrodes for highly efficient overall water splitting

Controlled Direct Electrodeposition of Crystalline NiFe/amorphous NiFe-(oxy)hydroxide on NiMo Alloy As a Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Trimetallic NiFeMo for Overall Electrochemical Water Splitting with a Low Cell Voltage

In situ electrochemical synthesis of superhydrophilic NiCoMn trimetallic-alloy nanosheets via the dynamic hydrogen bubble template method for developing high current density hydrogen production electrocatalysts

Controllable Design of Nanoworm-Like Nickel Sulfides for Efficient Electrochemical Water Splitting in Alkaline Media

Rational Design of Trimetallic Sulfide Electrodes for Alkaline Water Electrolysis with Ampere‐Level Current Density

Iron–Nickel Nitride Nanostructures in Situ Grown on Surface-Redox-Etching Nickel Foam: Efficient and Ultrasustainable Electrocatalysts for Overall Water Splitting

Ultrathin NiFe-Based Nanosheet Electrocatalysts for Efficient Water Oxidation

Facile Electrodeposition of Amorphous Nickel/Nickel Sulfide Composite Films for High-Efficiency Hydrogen Evolution Reaction

Fe‐Doped Ni3S2 Nanowires with Surface‐Restricted Oxidation Toward High‐Current‐Density Overall Water Splitting

Ultrafast Thermal Synthesis of Non-Noble Metal-Based Electrocatalysts for Overall Water Splitting

Bi-metallic Nitroxide Nanodot-Decorated Tri-Metallic Sulphide Nanosheets by On-Electrode Plasma-Hydrothermal Sprouting for Overall Water Splitting