Abstract:This study proposes a refractive index (RI) sensor using a cascaded tapered thin-core microfiber (TTCMF) based on the Vernier effect. The thin-core fiber was made into a TTCMF by arc discharging and flame heating and then sandwiched between two single-mode fibers (SMFs). The two structures with the same SMF-TTCMF-SMF but slightly different free spectral ranges (FSRs) were cascaded to generate the Vernier effect. The FSR varied with the taper parameters of TTCMF. The RI sensitivities of a single TTCMF sensor, series SMF-TTCMF-SMF sensor, and parallel SMF-TTCMF-SMF sensor were compared and analyzed. Using the Vernier effect in the RI measurement range from 1.3313 to 1.3392, a very high RI sensitivity of -15,053.411n m/R I U was obtained using the series SMF-TTCMF-SMF structure, and -16,723.243n m/R I U using the parallel structure, which were basically consistent with the simulation results. Compared with the RI sensitivity of the single TTCMF sensor, the RI sensitivities of series and parallel sensors were increased by 4.65 times and 5.16 times, respectively. In addition, in the temperature range from 35°C to 65°C, temperature sensitivities of -0.196n m/ ∘ C and -0.0489n m/ ∘ C were obtained using series and parallel structures, respectively; the corresponding temperature cross errors were 1.302×10-5 R I U/ ∘ C and 2.92×10-6 R I U/ ∘ C, respectively. Based on the advantages of high RI sensitivity, simple structure, low-temperature cross sensitivity, and convenient fabrication, the proposed sensors have great potential in biosensing fields.

High Sensitivity Refractive Index Sensor Based on Tapered Four-Core Fiber

High Sensitivity Refractive Index Sensor Based On Tapered Thin-Core Fiber

A Sensitivity-Enhanced Refractive Index Sensor Using A Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper

High Sensitivity Refractive Index Sensor based on a Tapered Single-mode-Multimode-Single-mode Fiber Structure

Sensitive Enhanced Refractive Index Sensor Based on Series Tapered Thin-Core Microfiber with Vernier Effect

Refractive index sensors based on the fused tapered special multi-mode fiber

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Fiber-Optic Refractive Index Sensor Based on Multi-Tapered SMS Fiber Structure

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

Sensitivity-enhanced Refractive Index Sensor by Using Tapered Thin-Core Fiber Based Inline Mach-Zehnder Interferometer

Compact Refractive Index Sensor Based on an S-tapered Fiber Probe

Refractive Index Sensing Based on Mach-Zehnder Interferometer Formed by Three Cascaded Single-Mode Fiber Tapers

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Highly Sensitive Refractive Index Sensor Based on a Cladding-Etched Thin-Core Fiber Sandwiched Between Two Single-Mode Fibers

Refractive index and temperature sensor based on fiber ring laser with tapered seven core fiber structure in 2 μm band

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

High-sensitivity Refractive-Index-distributed Optical Fiber Sensor Based on Optical Frequency Domain Reflectometry

High Sensitivity Refractive Index Sensor Based on Splicing Points Tapered Smf-Pcf-Smf Structure Mach-Zehnder Mode Interferometer

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Optical Vernier Sensor Based on a Cascaded Tapered Thin-Core Microfiber for Highly Sensitive Refractive Index Sensing.