Abstract:A high sensitivity liquid refractive index (RI) sensor based on a single mode fiber-multimode fiber-tapered thin-core fiber-single mode fiber (SMTTS) structure is simulated by the beam propagation method (BPM). The modal interference between core and cladding mode happened because of modal mismatch and the transmission spectrum is calculated by BPM. The approximate linear relationship between liquid RI and spectrum dip wavelength shifts is obtained to demodulate RI value. To make a comparison, transmissions of single mode fiber-thin-core fiber-single mode fiber (STS) as well as single mode fiber-multimode fiber-thin-core fiber-single mode fiber (SMTS) are also calculated. It is significantly shown that the interference is improved by the segment of multimode fiber (M_MF). And the tapered thin-core fiber (TCF) has the functions that not only further can enhance the fringe visibility, but also can increase the RI sensitivity, which is higher with the thinner thin-core taper diameter. When the taper diameter is 53.51m, the average RI sensitivity could reach up to -116.7nm/RIU within the RI range of 1.33 to 1.39. This is much higher than the value of SMTS structure. And in the practice application, it could be a slimmer taper in the SMTTS structure to improve the sensitivity just achieving by a simple fabrication process. All process could be finished using fusion splicer, cutter and hydrogen flame.

High-sensitivity Refractive-Index-distributed Optical Fiber Sensor Based on Optical Frequency Domain Reflectometry

Optofluidic Refractive Index Sensor Based on Partial Reflection

High Sensitivity Refractive Index Sensor Based On Tapered Thin-Core Fiber

Fiber-Optic Refractive Index Sensor Based on Multi-Tapered SMS Fiber Structure

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Novel Intensity-demodulated Fiber-optic Refractive Index Sensor Based on Splicing Point Tapered Fiber

Refractive index sensors based on the fused tapered special multi-mode fiber

Refractive Index Sensing Based on Mach-Zehnder Interferometer Formed by Three Cascaded Single-Mode Fiber Tapers

High Sensitive Refractive Index Sensor Based on Dispersion Turning Point Long-Period Fiber Gratings in Tapered Fiber

Slight-Offset Tapered Multimode Fiber with High Sensitivity for Low Refractive Index Range

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

An Interferometric Dual Microfiber Refractive Index Sensor via Tapering of Femtosecond Laser Perforated Optical Fiber

Improvement on Refractive Index Sensing by Exploiting the Tapered Two-Mode Fibers

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

Refractive Index Sensor Based on Fiber Loop Ring-Down Spectroscopy

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated by a Femtosecond Laser

Compact Refractive Index Sensor Based on an S-tapered Fiber Probe

Highly Sensitive Refractive Index Sensor Based on Novel Mach–Zehnder Interferometer with Multimode Fiber–thin Core Fiber–multimode Fiber Structure

A Differential Intensity-Modulated Refractive Index Sensor Using a Droplet-Like Fiber Cascaded With FBGs