Abstract:Titanium alloy was extensively used in aerospace industrial field. It has a great significance to directly reveal the deformation process as a function of application conditions. This work investigates the real-time deformation behavior of laser direct metal deposited (LDMD) Ti-6Al-4V alloy at 200 degrees C, using self-developed high temperature in situ scanning electron microscope (SEM) tensile stage with a controlled heating system. The results showed that the microstructure of the sample comprised of columnar beta grains with zigzag grain boundaries decorated by tilted alpha plates along the building direction. During uniaxial tensile, slip bands develop along the grain boundaries between alpha plates with increasing stress. Grain boundary sliding contributes to the high tensile elongation. Compared the mechanical properties along transvers tensile with those at room temperature, the tensile stress decreased and displacement increased at 200 degrees C. Therefore, higher elongation and reduction in cross-sectional area were identified at 200 degrees C than those at room temperature. The fracture of specimen at 200 degrees C shows obvious necking character and deep dimples with thin rims. Coalescence of slip bands at alpha/alpha interface creates voids and the coupling of voids nucleates micro-crack. alpha/alpha grain boundary interface constitutes path to the crack propagation. The high misorientation angle at columnar beta grain boundary hinders the cracks propagation. Finally, the cracks accumulate along the columnar beta grain boundary leading to fracture. (C) 2019 Elsevier B.V. All rights reserved.

In Situ Observation of Deformation Behavior in a Ti600/Ti2AlNb Electron Beam Welded Joint

Revealing Tensile Behaviors and Fracture Mechanism of Ti–6Al–4V Titanium Alloy Electron-Beam-welded Joints Using Microstructure Evolution and in Situ Tension Observation

In Situ Investigation of the Tensile Deformation of Laser Welded Ti2alnb Joints

In-situ Observation of Crack Evolution in Ti/Al Laminated Composite

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructure evolution and fracture behaviour for electron beam welding of Ti-6Al-4V

In-situ Investigation on Mechanical Behavior of Laser-Welded Joint for TC4 Titanium Alloy

Fracture behavior and mechanism of Ti-6Al-4V electron beam welded joint

Microstructure Evolution And Fracture Behaviour For Electron Beam Welding Of Ti-W-4v

Heterogeneous Deformation Behaviors of an Inertia Friction Welded Ti2AlNb Joint: an In-situ Study

Tensile Properties and Failure Analysis of Ti–6Al–4V Joints by Electron Beam Welding

Effect of Isothermal Deformation on Microstructure and Properties of Electron Beam Welded Joint of Ti2alnb/Tc11

Quasi-static and dynamic tensile behaviors in electron beam welded Ti-6Al-4V alloy

Microstructure and deformation mechanism of dissimilar titanium alloy Ti600/Ti22Al25Nb weld joints strengthened by isothermal forging

Microstructural Characteristics and Mechanical Properties of an Electron Beam-Welded Ti/Cu/Ni Joint

In-situ SEM observation on fracture behavior of laser welded BT20 titanium alloy joints

Microstructural investigations for laser welded joints of Ti–22Al–25Nb alloy sheets upon large deformation at elevated temperature

In-situ investigation of microstructure-dependent deformation behavior of an electron-beam welded Ni Co based superalloy

Effects of Deformation Temperature on Microstructure and Mechanical Properties of Electron Beam Welded Joint of Ti2AlNb/Ti60 Dual Alloys

Influence of hot work on microstructures and mechanical properties of electron beam weldment

Numerical Simulation and Experimental Investigation on Ti70 Titanium Alloy Electron-Beam-Welded Joint