Abstract:high sensitivity fiber-optic acceleration sensor based on a Fabry-Perot Interferometer (FPI) formed by an aluminum alloy elastic mass-block structure is proposed for measuring acceleration signals in a vibrating environment. The sensing structure mainly consists of a single-mode optical fiber collimated reflector 1, reflector 2 and a mass block elastic structure, where the optical fiber collimated reflector 1 and the reflector 2 located on the upper surface of the elastic mass block form an F-P interferometric cavity. According to the F-P interferometric sensing principle, the reflectivity of the two end faces and the cavity length parameters are simulated and optimized to produce an acceleration sensor with a highly finesse reflectance spectrum (extremely narrow spectral trough). The mass block dimensions of the sensing structure were simulated and optimized and performance analyzed using finite element software, and the sensor was fabricated according to the analysis results, and the amplitude-frequency response, sensitivity characteristics and lateral anti-interference capability of the sensor were investigated experimentally. The experimental results show that the sensor has an intrinsic frequency of 2100 Hz, a sensitivity of 4.91 nm/g at 1300 Hz, a resolution of 0.204 mg, and a transverse immunity of less than 5% within the operating bandwidth of 0-1300 Hz. The sensor proposed in this paper is characterized by high sensitivity, a large operating bandwidth range, and low lateral interference, making it suitable for monitoring medium and high-frequency vibration signals in aerospace and other equipment structures.

Medium-High Frequency and High Sensitivity Fiber Optic Acceleration Sensor Based on F-P Interference

High Sensitivity Fiber Optic Acceleration Sensor Based on Fabry -Perot Interferometer

Miniature Tri-Axis Accelerometer Based on Fiber Optic Fabry-Pérot Interferometer.

A Fiber-Optic Accelerometer Based on Extrinsic Fabry-Perot Interference for Low Frequency Micro-Vibration Measurement

A Fiber-Optic Fabry-Perot Accelerometer Based on High-Speed White Light Interferometry Demodulation

Fabry-Perot Interferometer Based on an Aluminum-Polyimide Composite Diaphragm Integrated with Mass for Acceleration Sensing

Ultra-high-resolution phase demodulation based miniature fiber-optic accelerometer at low and medium frequencies

An In-Fiber Acceleration Sensor Based on Fabry–Perot Cavity

All-fiber Vibration Sensor Based on a Fabry–Perot Interferometer and a Microstructure Beam

Low-Frequency High-Resolution Fiber Fabry-Perot Interferometric Accelerometer Based on Double-Spring-Supported Oscillator

Theoretical Model and Design of Highly Sensitive Reflective Fiber Optic Fabry-Pérot Cavity Accelerometer Independent of Fiber Stiffness

A Low-Frequency Vibration Acceleration Sensor Based on a Long-Period Fiber Grating and a Double-Clamped Beam

Highly sensitive fiber-optic accelerometer using a micro suspended-core fiber.

Passive Silicon On-Chip Optic Accelerometer for Low Frequency Vibration Detection

A High-Frequency Acceleration Sensor Based on Fiber Grating

A Fiber Optic Accelerometer with High Sensitivity Based on Two-End Fixed Beam

A multi-cantilever beam low-frequency FBG acceleration sensor

A High-Sensitivity Dual-Axis Accelerometer with Two FP Cavities Assembled on Single Optical Fiber.

Dual straight-wing FBG accelerometer for low-frequency vibration measurement

In-Fiber Integrated Accelerator

Flexible Optical Fiber Fabry–Perot Interferometer Based Acoustic and Mechanical Vibration Sensor