Abstract:Aeroelastic instabilities will occur to the aero-engine fans inevitably during transient operations, causing excessive blade vibration and threatening the structural integrity. However, the complicated fluid-solid coupling interactions in aero-engine are difficult to be described precisely using current numerical or analytical models. Instead, experimental investigations on the flow induced blade vibration can reveal the aeroelastic performance of aero-engines, which is regarded as an effective approach to provide instructive guidance in the design of aero-engine. In this paper, experiments on a realistic aero-engine fan with 3.5 stages is conducted to study the typical aeroelastic instabilities, including the blade forced response, flutter, and acoustic resonance. In addition to the conventional blade strain measurements, the duct acoustic array measurements are also implemented to characterize the distinguishing acoustic features of the aeroelastic instabilities. Particularly, the acoustic mode decomposition technique is employed to provide insight into the unsteady flow as the aeroelastic instabilities occur, by which the blade vibration and aerodynamic excitation are bridged. The run-up test is conducted firstly to investigate the blade forced response and flutter; thereafter, a transient test is designed to encounter the acoustic resonance. The results illustrate the acoustic features of aeroelastic instabilities properly, validating the feasibility of acoustic measurement for instability identification. When the blade forced response occurs in the run-up test, the amplitude of Tyler-Sofrin mode increases significantly. The flutter also occurs in the run-up test and is believed to be excited by the rotating instability, where a sloping strip in the acoustic mode spectrum can be observed. In terms of the acoustic resonance, a nonsynchronous tonal component is observed below the blade passing frequency, where the dominant acoustic mode order matches the nodal diameter number. This paper presents an alternative way to study vibrations using acoustic measurements and the acoustic mode decomposition, which is validated by experiments on a realistic aero-engine fan.

A Rapid Predicting Model for Aerodynamic Instability in Aero-Engine

Combustion Instability Detection Based on Multi-Signal Information Fusion for an Industrial Gas Turbine Combustor

A novel aeroengine real-time model for active stability control: compressor instabilities integration

Experimental Investigation on Aerodynamic Instability of Axial Flow Engine

Prediction of centrifugal compressor instabilities for internal combustion engines operating cycle simulation

Research Progress in Prediction of Flow Instability of Aero-Compressor

Calculation of Flow Instability Inception in High Speed Axial Compressors Based on an Eigenvalue Theory

A Theoretical Model For Flow Instability Inception In Transonic Fan/Compressors

Experimental Investigation on the Aerodynamic Instability Process of a High-Speed Axial-Centrifugal Compressor

Numerical Study of Fuel Spiking Induced Surge in a Small-scale Aircraft Engine

Aerodynamic Instability Evolution of a Multi-Stage Combined Compressor

Combustion Rumble Prediction with Integrated Computational-Fluid-Dynamics/Low-Order-Model Methods

The Effects of Reynolds Number on the Instability Boundary and Dynamic Characteristic of an Axial-Centrifugal Combined Compressor

Application of Probability Density Function Analysis in the Monitoring of Engine Aerodynamic Instability Precursor

Experimental investigation of aeroelastic instabilities in an aeroengine fan: Using acoustic measurements

Sensing the Aerodynamic Instability of a Compressor Using Auto-correlation Function

Aerodynamic Instabilities of Swept Airfoil Design in Transonic Axial-Flow Compressors

Parametric analysis of thermal cycle of a short take-off and vertical landing engine

Low-order modeling approach for the prediction of transverse combustion instabilities in multi-injector engines

A Performance Simulation Methodology for a Whole Turboshaft Engine Based on Throughflow Modelling

Combustion Instability of a Multi-injector Rocket Engine Using the Flamelet Progress Variable Model