Abstract:Radar systems are a type of sensor that detects radio signals reflected from objects located a long distance from transmitters. For covering a longer range and a higher resolution in the operation of a radar, a high-frequency band and an array antenna are measures to take. Given a limited size to the antenna aperture in the front end of the radar, the choice of a millimeter-wave band leads to a denser layout for the array antenna and a higher antenna gain. Millimeter-wave signals tend to become attenuated faster by a larger loss of the covering material like the radome, implying this disadvantage offsets the advantage of high antenna directivity, compared to the C-band and X-band ones. As the radome is essential to the radar system to protect the array antenna from rain and dust, a metamaterial surface in the layer is suggested to meet multiple objectives. Firstly, the proposed electromagnetic structure is the protection layer for the source of radiation. Secondly, the metasurface does not disturb the millimeter-wave signal and makes its way through the cover layer to the air. This electromagnetically transparent surface transforms the phase distribution of the incident wave into the equal phase in the transmitted wave, resulting in an increased antenna gain. This is fabricated and assembled with the array antenna held in a 3D-printed jig with harnessing accessories. It is examined in view of S21 as the transfer coefficient between two ports of the VNA, having the antenna alone and with the metasurface. Additionally, the far-field test comes next to check the validity of the suggested structure and design. The bench test shows around a 7 dB increase in the transfer coefficient, and the anechoic chamber field test gives about a 5 dB improvement in antenna gain for a 24-band GHz array antenna.

Co‐designed radome with parasitic patches for the profile reduction and gain enhancement of antennas

Topological Design of Planar Circularly Polarized Directional Antenna with Low Profile Using Particle Swarm Optimization

A Low-RCS and Wideband Circularly Polarized Array Antenna Co-Designed With a High-Performance AMC-FSS Radome

A Metamaterial Surface Avoiding Loss from the Radome for a Millimeter-Wave Signal-Sensing Array Antenna

Enhanced High-gain Antenna Design with Phase-Controlled Frequency Selective Rasorber for LowRCS Performance

Intelligent Radome Design With Multilayer Composites to Realize Asymmetric Transmission of Electromagnetic Waves and Energy Isolation

Design and Characterization for Dual-Band and Multi-Band A-sandwich Composite Radome Walls

Low-Profile Wideband Millimeter-Wave Circularly Polarized Antenna With Hexagonal Parasitic Patches

Intelligent Radome Design Using Multilayer Metamaterial Structures to Realize Energy Isolation and Asymmetric Propagation of Electromagnetic Wave

High Performance 5G Antenna Radome Based on Absorptive Meta-surface

Design of an Invisible Radome by Frequency Selective Surfaces Loaded with Lumped Resistors

Broadband low-scattering and high-efficiency transmission radome by combining phase gradient metasurface and FSS

A novel circularly polarized patch antenna based on polarization conversion metasurface for radiation and scattering performance improvement

A High Gain Antenna with an Optimized Metamaterial Inspired Superstrate

A Polarization Conversion Radome for High-Power Microwave Applications

Broadband Low-RCS and High-Gain Microstrip Antenna Based on Concentric Ring-Type Metasurface

Out-of-band RCS Reduction of a Dipole Antenna Based on Frequency-Selective Metasurface

A Novel Radome Material with Lower Reflectivity

Analysis of Performance Degradation Introduced by Radome for High-Precision GNSS Antenna

Design of a hybrid A-sandwich radome using a strongly coupled frequency selective surface element

A planar stealthy antenna radome using absorptive frequency selective surface