A Metamaterial Surface Avoiding Loss from the Radome for a Millimeter-Wave Signal-Sensing Array Antenna

Inyeol Moon,Woogon Kim,Yejune Seo,Sungtek Kahng
DOI: https://doi.org/10.3390/s24031018
IF: 3.9
2024-02-06
Sensors
Abstract:Radar systems are a type of sensor that detects radio signals reflected from objects located a long distance from transmitters. For covering a longer range and a higher resolution in the operation of a radar, a high-frequency band and an array antenna are measures to take. Given a limited size to the antenna aperture in the front end of the radar, the choice of a millimeter-wave band leads to a denser layout for the array antenna and a higher antenna gain. Millimeter-wave signals tend to become attenuated faster by a larger loss of the covering material like the radome, implying this disadvantage offsets the advantage of high antenna directivity, compared to the C-band and X-band ones. As the radome is essential to the radar system to protect the array antenna from rain and dust, a metamaterial surface in the layer is suggested to meet multiple objectives. Firstly, the proposed electromagnetic structure is the protection layer for the source of radiation. Secondly, the metasurface does not disturb the millimeter-wave signal and makes its way through the cover layer to the air. This electromagnetically transparent surface transforms the phase distribution of the incident wave into the equal phase in the transmitted wave, resulting in an increased antenna gain. This is fabricated and assembled with the array antenna held in a 3D-printed jig with harnessing accessories. It is examined in view of S21 as the transfer coefficient between two ports of the VNA, having the antenna alone and with the metasurface. Additionally, the far-field test comes next to check the validity of the suggested structure and design. The bench test shows around a 7 dB increase in the transfer coefficient, and the anechoic chamber field test gives about a 5 dB improvement in antenna gain for a 24-band GHz array antenna.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
The problem that this paper attempts to solve is how to avoid signal loss caused by the radome in millimeter - wave signal sensing array antennas, thereby improving antenna gain and the performance of the radar system. Specifically, due to its high frequency and short wavelength, millimeter - wave signals are prone to significant losses when passing through the radome. This will reduce the antenna gain and affect the resolution and accuracy of the radar. To solve this problem, the author proposes a design scheme based on a metamaterial surface. This metamaterial surface can be part of the radome. It not only protects the antenna from environmental factors but also reduces or eliminates the signal loss when passing through the radome and maintains the phase consistency of the signal, thereby increasing the antenna gain. The main contribution of the paper lies in the design and implementation of this metamaterial surface and the verification of its effectiveness through experiments. The experimental results show that after using this metamaterial surface, the antenna's transmission coefficient has increased by approximately 7 dB, and the far - field test shows that the antenna gain has increased by approximately 5 dB. These improvements are of great significance for enhancing the performance of millimeter - wave radar systems.