Abstract:This article reports a high-gain wideband low-noise amplifier (LNA) with single ended input and differential output for multi-standard wireless receiver operating in 0.2 to 7 GHz. The proposed balun-LNA is cascode structure with common-gate–common-source (CG–CS) balun load to achieve single to differential conversion. Focusing on improving the voltage gain, bandwidth and noise performance at the same time, several techniques are implemented in this balun-LNA. A current source is added shunting CG stage to relieve voltage headroom and improve gain and linearity. Wideband input matching is achieved by active shunt-shunt resistive feedback, together with the input series inductor. Moreover, feedforward and current-reuse technique are introduced to further optimize the noise performance. The proposed LNA has a measured voltage gain of 26 dB which is nearly 6 dB higher than other balun-LNA with same supply and process. Moreover, the minimum noise figure (NF) is 2.0 dB owing to multiple noise-optimized technique. The achieved input power at 1 dB gain compression point (IP1 dB) is −14 dB m at 1 GHz and input return loss ( S11 ) is better than −10 dB across entire operating frequency range. IIP3 and IIP2 achieve −7 dBm and 25 dBm respectively, measured at 1 GHz. The power consumption is 15.5 mW at 1.2 V supply. The LNA is fabricated in 130 nm CMOS process and the active area is 0.097 mm2 . The LNA achieves high voltage gain and wide operating frequency range with low NF, which can be reflected from the figure of merit (FOM) of 23.1.

A 800Mhz-3.8Ghz 1.6-Db NF Inductorless Wideband CMOS LNA for Wireless Communications

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A Gm-boosted and current peaking wideband merged LNA and mixer

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

A 0.03-3Ghz Inductorless Wideband Low Noise Amplifier in 65nm CMOS

A high-gain wideband balun-LNA with multiple noise-optimized technique

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

A Wideband Inductorless LNA with Local Feedback and Noise Cancelling for Low-Power Low-Voltage Applications

An Inductorless Wideband Common-Gate Lna with Dual Capacitor Cross-Coupled Feedback and Negative Impedance Techniques

A 0.13-μm CMOS 0.8–10.6GHz low noise amplifier with active balun for multi-standard applications

Low Power 0.18&#x00b5;m CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A1V 6mW inductorless wideband LNA in 0.13μm RF CMOS

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

A 0.13-Mu M Cmos 0.1-12 Ghz Active Balun-Lna For Multi-Standard Applications

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

Design of Ultra-Wideband LNA with 3.6 ± 0.4 Db NF and 15.9 ± 1.1 Db Gain

A Low Power Inductorless Wideband LNA With G m Enhancement and Noise Cancellation

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

A 800Mhz-3.8Ghz 1.6-Db NF Inductorless Wideband CMOS LNA for Wireless Communications

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A Gm-boosted and current peaking wideband merged LNA and mixer

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

A 0.03-3Ghz Inductorless Wideband Low Noise Amplifier in 65nm CMOS

A high-gain wideband balun-LNA with multiple noise-optimized technique

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

A Wideband Inductorless LNA with Local Feedback and Noise Cancelling for Low-Power Low-Voltage Applications

An Inductorless Wideband Common-Gate Lna with Dual Capacitor Cross-Coupled Feedback and Negative Impedance Techniques

A 0.13-μm CMOS 0.8–10.6GHz low noise amplifier with active balun for multi-standard applications

Low Power 0.18&amp;#x00b5;m CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A1V 6mW inductorless wideband LNA in 0.13μm RF CMOS

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

A 0.13-Mu M Cmos 0.1-12 Ghz Active Balun-Lna For Multi-Standard Applications

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

Design of Ultra-Wideband LNA with 3.6 ± 0.4 Db NF and 15.9 ± 1.1 Db Gain

A Low Power Inductorless Wideband LNA With G m Enhancement and Noise Cancellation

A 4.7-to-18-ghz Ultra-Wideband Variable-Gain Balun-LNA Using 3 Rd -Order-band-pass Input Matching in 40-Nm CMOS.

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver