Abstract:AlSi10Mg is the most widely processed material among the Al-Si-Mg family by utilizing additive manufacturing routes. Properties such as corrosion resistance, low density and high specific strength open the door to be a competitive material in aerospace and automotive industries. AlSi10Mg alloy of 80 × 25 × 5 mm rectangular pieces was manufactured using a laser-assisted powder bed fusion route and subsequently solutionized at 520 °C for 2 hours. Solution-treated samples were cold rolled to 20, 40 and 60% reduction with multi-passes. Samples were rotated by 90° between the passes. The current work aims at assessing the effect of cold cross-rolling on the microstructure and hardness. Optical, scanning electron microscope and XRD were used for characterization. The density of the as-built, solution treated, and cold-rolled samples was measured using Archimedes' principle. The optical microstructure of the as-built sample revealed the melt pool boundaries on the surface and fish scale morphology in the transverse plane. Scanning electron microstructure of the as-built sample revealed the silicon network surrounding the alpha aluminum cells. Solution heat treatment has resulted in the formation of discrete Si particles in the matrix. There was not much difference in the size of the aluminum cells and Si particles with respect to the percentage rolling reductions or on the other hand rolling has not brought any change in the microstructural morphology. However, the increase in hardness upon increasing the percentage reduction in thickness is mainly attributed to the phenomenon of dislocation strengthening. The 60% cold rolled specimen showed a 35 and 142% increase in hardness as compared to as-built and as-cast alloy respectively. XRD pattern has clearly indicated the Al and Si peaks. The crystallite size decreased with an increase in percentage rolling while the lattice strain had the opposite effect.

Effect of Hot Rolling on Microstructures and Mechanical Properties of SiCp/A356 Aluminum Matrix Composites

Effect of hot rolling on microstructures and mechanical properties of SiC p /A356 aluminum matrix composites

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Microstructure study of hot rolling nanosized in-situ Al2O3 particle reinforced A356 matrix composites

EFFECTS OF HOT-ROLLING PROCESSES ON THE FRACTURE BEHAVIORS AND MECHANICAL PROPERTIES OF 2009Al/SiCp METAL MATRIX COMPOSITES

Effects of Hot Rolling on Microstructure and Properties of a 20 Vol.% SiC P /al Composite

Microstructure and mechanical properties of Ti6Al4V based laminated composites at various rolling reductions

Microstructure and mechanical properties of in-situ Ti 5 Si 3 /TC4 composites via spark plasma sintering and hot rolling

Effect of Rolling Reduction on Microstructures and Mechanical Properties of Sc-Containing Al-3.2Cu-1.5Li Alloy

Effects of Hot Rolling on Microstructure, Macrotexture and Mechanical Properties of Pre-Extruded Az31/Sic Nanocomposite Sheets

Microstructural Modification and Strength Enhancement by SiC Nanoparticles in AZ31 Magnesium Alloy During Hot Rolling

Effects Of Rolling Process On Microstructure And Mechanical Property Of 7050 Aluminum Alloy

Evolution of Microstructure, Texture and Mechanical Properties of SiC/AZ31 Nanocomposite During Hot Rolling Process

Microstructure, Mechanical and Thermal Properties of Al/Cu/SiC Laminated Composites, Fabricated by the ARB and CARB Processes

Fabrication, microstructure, mechanical properties and wear behavior of Al/Cu-SiC w composite

The Effect of Rolling Temperature on the Microstructure and Mechanical Properties of 5 Vol.% (tibw + TiCp)/Ti Composites

Effect of hard plate rolling on microstructure and mechanical properties of Mg-9Al-1Zn-based composites reinforced with Ti-6Al-4V particles

Effect of cold-rolling on tensile strength of SiCw/Al composite

Effect of Cross-Rolling on the Hardness of the AlSi10Mg Alloy Fabricated through Powder Bed Fusion

Effect of thickness ratio on microstructure evolution and coordinated behavior of Mg/Al composite plates in one-pass asymmetric rolling with differential temperature rolls

Effect of Rolling Reduction on Microstructure and Mechanical Properties of Mg-9Gd-3Y-0.5Zr Alloys