Abstract:Membrane technology is considered an innovative and promising approach due to its flexibility and low energy consumption. In this work, a comprehensive 3D-CFD model of the Hollow-Fiber Membrane Contactor (HFMC) system for CO2 capture into aqueous MEA solution, considering a counter-current fluid flow, was developed and validated with experimental data. Two different flow arrangements were considered for the gas mixture and liquid solution inside the HFMC module. The simulation results showed that the CO2 absorption efficiency was considerably higher when the gas mixture was channeled through the membranes and the liquid phase flowed externally between the membranes, across a wide range of gas and liquid flow rates. Sensitivity studies were performed in order to determine the optimal CO2 capture process parameters under different operating conditions (flow rates/flow velocities and concentrations) and HFMC geometrical characteristics (e.g., porosity, diameter, and thickness of membranes). It was found that increasing the membrane radius, while maintaining a constant thickness, positively influenced the efficiency of CO2 absorption due to the higher mass transfer area and residence time. Conversely, higher membrane thickness resulted in higher mass transfer resistance. The optimal membrane thickness was also investigated for various inner fiber diameters, resulting in a thickness of 0.2 mm as optimal for a fiber inner radius of 0.225 mm. Additionally, a significant improvement in CO2 capture efficiency was observed when increasing membrane porosity to values below 0.2, at which point the increase dampened considerably. The best HFMC configuration involved a combination of low porosity, moderate thickness, and large fiber inner diameter, with gas flow occurring within the fiber membranes.

Regeneration of CO2 from CO2-rich Absorbents Using Hollow Fiber Membrane Contactors in Liquid–liquid Extraction Mode

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Hollow Fiber Contained Hydrogel-Ca Membrane Contactor for Carbon Dioxide Removal from the Enclosed Spaces

Regeneration of CO2 Absorbent with Membrane Contactor Via Pressure Swing

Co(2) Chemical Absorption by Using Membrane Vacuum Regeneration Technology

Removal of Carbon Dioxide from Pressurized Landfill Gas by Physical Absorbents Using a Hollow Fiber Membrane Contactor

Deep CO2 Removal Using High Pressure Membrane Contactors with Low Liquid-to-gas Ratio

Direct CO 2 mineralization using seawater reverse osmosis brine facilitated by hollow fiber membrane contactor

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

Experimental Study on Regeneration Characteristics of CO2-rich Blended Amine Solution Using Membrane Vacuum Regeneration Technology

Carbon Dioxide Absorption from Biogas by Amino Acid Salt Promoted Potassium Carbonate Solutions in a Hollow Fiber Membrane Contactor: A Numerical Study

CO2 Desorption from Rich Alkanolamine Solution by Using Membrane Vacuum Regeneration Technology

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture

Research on Integrated CO2 Absorption-Mineralization and Regeneration of Absorbent Process

Experimental Study on the Separation of CO2 from Flue Gas Using Hollow Fiber Membrane Contactors Without Wetting

Membrane Stripping Technology for CO2 Desorption from CO2-rich Absorbents with Low Energy Consumption

HOLLOW FIBER MEMBRANE CONTACTOR ABSORPTION OF CO 2 FROM THE FLUE GAS : REVIEW AND PERSPECTIVE

Electrochemical regeneration of high-purity CO 2 from (bi)carbonates in a porous solid electrolyte reactor for efficient carbon capture

Co2 Capture by Membrane Absorption Coupling Process: Experiments and Coupling Process Evaluation

3D-CFD Modeling of Hollow-Fiber Membrane Contactor for CO2 Absorption Using MEA Solution