Abstract:A novel membrane vacuum regeneration (MVR) technology was developed to achieve lower regeneration energy demand for CO2 absorption process. Sixteen different amine-based absorbents including primary, secondary, tertiary amines, polyamines, diamines, and sterically hindered amines were analyzed by combined absorption–desorption screening experiments for selecting the most effective absorbents for CO2 membrane vacuum regeneration (MVR) technology. The CO2 absorption experiments were conducted in a hollow fiber membrane contactor (HFMC) at 25°C and 12.5kPa CO2 partial pressure. The CO2 rich solvent was regenerated at 75°C and 20kPa regeneration pressure by using the MVR technology. The chain length, number of functional groups, side chain, and number of hydroxyl groups of amines were investigated to get a better understanding on the effects of the structure in the MVR process. The results show that the tertiary amines have greater regeneration performances than the primary amines, but the CO2 absorption rates of the tertiary amines are worse than the primary amines. For the polyamines, the absorption performance of polyamines can be improved by increasing the number of amine groups while the MVR performance of the polyamines can be reduced. Steric hindered amines exhibited greater MVR performances. In addition, amines with steric hindrance effect caused by the substitution of hydroxyl group or methyl group to amine group in structure has also shown good performance in the MVR process for CO2 desorption. The overall performance of amine-based absorbents was also investigated by an absorption–desorption characters analysis. It shows triethylenetetramine (TETA) and N-methyldiethanolamine (MDEA) have great average CO2 absorption rates and relatively high cyclic capacities per mole absorbent, and ethylenediamine (EDA) is considered to be the promising absorbent as cyclic capacity in mol CO2/kg absorbent. Diethanolamine (DEA) and 2-Amino-2-methyl-1-propanol (AMP) are found to have the best overall performances in terms of CO2 absorption rate at lean loading and cyclic capacity in mol CO2/mol absorbent. In terms of overall performance, MDEA is mostly recommended for using in MVR process. Sweeping steam can significantly improve MVR performance in most selected absorbents except AMP and 2-amino-2-hydroxymethyl-1,3- propanediol (THAM) absorbents which present the potential to reduce the regeneration energy demand by operating without sweeping steam. The study also finds that MVR shows better regeneration performance as compared to traditional thermal regeneration process at the same regeneration temperature.

Membrane Stripping Technology for CO2 Desorption from CO2-rich Absorbents with Low Energy Consumption

CO2 Desorption from Rich Alkanolamine Solution by Using Membrane Vacuum Regeneration Technology

Co(2) Chemical Absorption by Using Membrane Vacuum Regeneration Technology

Experimental Study on Regeneration Characteristics of CO2-rich Blended Amine Solution Using Membrane Vacuum Regeneration Technology

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Modeling of CO2 Stripping in a Hollow Fiber Membrane Contactor for CO2 Capture

Comparison and Selection of Amine-based Absorbents in Membrane Vacuum Regeneration Process for CO2 Capture with Low Energy Cost

Study on desorption of CO2-rich solution by membrane

Understanding the performance of membrane for direct air capture of CO2

Amine-based absorbents selection for CO2 membrane vacuum regeneration technology by combined absorption–desorption analysis

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

CO2 trapping method combining dimethyl carbonate absorption and membrane desorption

Experimental Study of Energy Requirement of CO2 Desorption from Rich Solvent

Experimental And Rate-Based Modeling Study Of Co2 Capture By Aqueous Monoethanolamine

Process Simulations of CO2 Desorption in the Interaction between the Novel Direct Steam Stripping Process and Solvents

Membrane Evaporation for Energy Saving in CO2 Chemical Absorption Process Using a Polybenzimidazole Film: Mass and Heat Transfer

Study on the Mechanism and Energy Consumption of CO2 Regeneration Process by Membrane Electrolysis

A Coupling Calculation Method of Desorption Energy Distribution Applied to CO2 Capture by Chemical Absorption

Mixed Amine Absorbent based on Hollow Fiber Membrane Contactor Removes CO2 from Flue Gas

A Novel Diamine Non-Aqueous Absorbent Based on N-methyl diethanolamine Regulation for Energy-efficient CO2 Capture

Microporous polypropylene hollow fiber membranes contactor for the separation and fixation of carbon dioxide from simulative flue gas