44.6 Fs Pulse Generation in an Er:fiber Laser at 540 MHz Repetition Rate

Zhendong Chen,Ruoao Yang,Yangpeng Tang,Duo Pan,Ya Wang,Jingpeng Cao,Jian Jun Wu,Zhigang Zhang,Jingbiao Chen

DOI: https://doi.org/10.1364/cleo_si.2024.sf1g.6

2024-01-01

Abstract:We demonstrate a mode-locked ring-cavity Er:fiber laser at a repetition rate of 540 MHz. The pulse duration is 44.6 fs with a spectral bandwidth of 82 nm. The maximum output power is 280 mW.

What problem does this paper attempt to address?

37.4 fs pulse generation in an Er:fiber laser at a 225 MHz repetition rate.

Ding Ma,Yue Cai,Chun Zhou,Weijian Zong,Lingling Chen,Zhigang Zhang

DOI: https://doi.org/10.1364/OL.35.002858

IF: 3.6

2010-01-01

Optics Letters

Abstract:We report 37.4 fs pulse generation from a ring-cavity Er: fiber laser at a repetition rate of 225 MHz. The spectral bandwidth of the pulse is 135 nm. The single-pulse energy is 0.31 nJ. (C) 2010 Optical Society of America
66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

minglie hu,lu chai,weidong shen,xu liu,chingyue wang,han chi,bowen liu,youjian song

DOI: https://doi.org/10.1364/fbta.2014.fth4f.3

2014-01-01

Abstract:We present a mode-locked all-normal-dispersion double-clad Yb-doped fiber laser with 3 W output average power at 81 MHz repetition rate for 37 nJ chirped pulses, which can be compressed to 66 fs, with 400 KW peak power.
464 MHz repetition rate erbium doped soliton fiber laser

jian zhang,fuzeng niu,xing chen,xiang gao,yizhou liu,aimin wang,zhigang zhang

DOI: https://doi.org/10.1364/cleo_si.2014.sw3e.1

2014-01-01

Abstract:We demonstrate an Er:fiber ring laser operated at the fundamental repetition rate of 464MHz. The output power is 115mW under the pump power of 1.65W. The pulse width is 123fs.
A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

Liu Huan,Gong Ma-Li,Cao Shi-Ying,Lin Bai-Ke,Fang Zhan-Jun

DOI: https://doi.org/10.7498/aps.64.114210

2015-01-01

Abstract:High-repetition-rate fiber laser has widely applications in the field of femtosecond frequency comb, ultra-fast optical sampling, and so on. In this paper, an Er-doped femtosecond fiber laser with a repetition rate of 303 MHz is demonstrated based on the mechanism of nonlinear polarization rotation. By means of optimization of cavity dispersion, the net dispersion in fiber cavity is a little negative nearby zero point. After mode locking, the laser is operating in the stretched-pulse regime. At a pump power of 817 mW, the output power of the laser is 125 mW in continue-wave state, and 69 mW in mode-locking state. The laser directly generates 90 fs before dispersion compensation. Mode locking can self-start at the pump power of 700-817 mW. Repetition rate drift of the mode-locked laser is 30 Hz in five hours.
Sub-100khz Repetition Rate Mode-Locked Dispersion Managed Erbium-Doped Fiber Laser

Yue Cai,Chun Zhou,Lingling Chen,Meng Zhang,Ling Ren,Peng Li,Zhigang Zhang

DOI: https://doi.org/10.1109/cleopr.2009.5292561

2009-01-01

Abstract:A 91 4 kHz repetition rate Er-doped dispersion managed mode-locked fiber laser was demonstrated The pulse energy was amplified to 790 nJ though single stage amplifier.
Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

Yuwei Zhao,Wanli Zhao,Tongyu Liu

DOI: https://doi.org/10.1088/1555-6611/ad8cb7

IF: 1.2

2024-11-09

Laser Physics

Abstract:High repetition rate fiber lasers have attracted great attention in recent years due to their potential applications including spectroscopy and laser processing. In this manuscript, we have demon-strated sub-30 fs pulses directly from a compact Er-doped fiber laser amplifier system with a high repetition rate of ∼203 MHz. The design of the laser comprises of a home-built oscillator based on nonlinear polarization evolution mode-locking mechanism, an all-fiber amplifier, and a fiber type compressor. By optimizing the length of single mode fiber compressor, the shortest pulse duration of 26 fs is achieved, which is ∼4.9 optical cycle at 1570 nm. The average output power of the de-chirped pulse is 267 mW with corresponding pulse energy of 1.3 nJ. Such a high repetition rate fiber laser with few-cycle pulse holds tremendous potential for numerous applications that require high temporal resolution, and high photon flux.

optics,physics, applied
34.3 Fs Pulse Generation in an Er-doped Fibre Laser at 201 MHz Repetition Rate

Xing Li,Weiwen Zou,Jianping Chen

DOI: https://doi.org/10.1049/el.2014.4251

2015-01-01

Electronics Letters

Abstract:A 34.3 fs pulse generation dechirped from a nonlinear polarization evolution (NPE)-based modelocked Er-doped fibre laser at a repetition rate of 201 MHz is reported. The output power is 38.5 mW at a pump power of 700 mW.
325 Mhz and Near Transform-Limited Pulse Output Directly from an Er:Fiber Ring Laser

Hongxia Qi,Jian Zhang,Gengji Zhou,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.3788/col201311.061402

IF: 2.56

2013-01-01

Chinese Optics Letters

Abstract:A compact Er:fiber ring laser operated at a fundamental repetition rate of 325 MHz is reported. Two gain fibers with opposite dispersion are employed to shorten the fiber laser cavity for high repetition rate and soliton-like pulse generation without losing gain and compactness. The spectral bandwidth of the output pulse is 24 nm and the direct pulse duration is 123 fs without extra-cavity compression, which are values near the transform-limited range.
Direct Generation of 148 nm and 44.6 fs Pulses in an Erbium-Doped Fiber Laser

Xing Li,Weiwen Zou,Guang Yang,Jianping Chen

DOI: https://doi.org/10.1109/LPT.2014.2362514

2015-01-01

Abstract:This letter demonstrates an experimental realization of effective dispersion and nonlinearity optimization in an Er-doped fiber laser at a high repetition rate of larger than 200 MHz. The maximum power of the direct output pulse at an available pump power of 700 mW is 84.8 mW with a pulse duration of 56.5 fs, which exhibits a high transfer efficiency of 12.1%, single-pulse energy of 0.42 nJ, and pulse peak power of 7 kW. Evolution of the spectral characteristics of the direct output pulse is further studied by adjusting the waveplates and tuning the pump power. 44.6-fs ultrafast pulses with a flat full spectral width at half maximum of 148 nm are directly generated.
41.9 fs hybridly mode-locked Er-doped fiber laser at 212 MHz repetition rate

xing li,weiwen zou,jianping chen

DOI: https://doi.org/10.1364/OL.39.001553

IF: 3.6

2014-01-01

Optics Letters

Abstract:We demonstrate a hybridly mode-locked erbium-doped fiber laser. It combines saturable absorption and nonlinear polarization evolution to produce stable and purified femtosecond pulses with a high repetition rate of 212 MHz. The average output power is larger than 65 mW, and the single-pulse energy is 0.31 nJ at a pump power of 750 mW. A wide spectrum with FWHM of 61.4 nm is obtained. The dechirped pulse duration is 41.9 fs, which is near the transform-limited range. (C) 2014 Optical Society of America
30 Fs Level Pulse Generation Directly from an Er:fiber Laser

Ding Ma,Chun Zhou,Yue Cai,Weijian Zong,Zhigang Zhang

DOI: https://doi.org/10.1364/fio.2010.ftuj3

2010-01-01

Abstract:We report 30 fs level pulse generation directly from a mode locked Er:fiber laser at a repetition rate of 225 MHz.
439 MHz, 94 fs, low-threshold mode-locked all fiber ring laser

Xiwei Huang,Xiaoxiao Guo,Xiaohui Li,Xu Tang,Rui Zhang,Yan Zhang,Yishan Wang,Wei Zhao

DOI: https://doi.org/10.1016/j.optlastec.2024.111336

IF: 4.939

2024-06-21

Optics & Laser Technology

Abstract:Pulsed fiber lasers with high repetition rates play a crucial role in applications such as high-efficiency processing and bio-optical imaging. However, many ring fiber mode-locked lasers primarily focus on shortening the cavity length to achieve high repetition rate pulse output. Attention is often directed towards the gain fiber and cavity structure, with less consideration given to the challenge of increasing mode-locking threshold power. In this study, we present a high-repetition-rate annular all-fiber laser system with dispersion management. Through strategic adjustment of the intracavity dispersion away from the near-zero dispersion region and careful control of the intracavity gain strength, we have successfully lowered the mode-locking threshold power. This approach can generate pulses with a repetition rate of 439.71 MHz and a mode-locking threshold power of approximately 600 mW. Following pulse compression, the achieved pulse width is 94.8 fs. Its time-bandwidth product is 0.368. To our knowledge, this represents the highest fundamental repetition rate currently attained using a ring all-fiber resonator, accompanied by the lowest mode-locking threshold. Our work introduces a ring fiber laser system characterized by a low mode-locking threshold and a high repetition rate, offering a valuable method for achieving higher fundamental repetition rate pulses.

optics,physics, applied
419 Fs Hybridly Mode-Locked Er-doped Fiber Laser at 212 MHz Repetition Rate

Xing Li,Weiwen Zou,Jianping Chen

DOI: https://doi.org/10.1364/ol.39.001553

IF: 3.6

2014-01-01

Optics Letters

Abstract:We demonstrate a hybridly mode-locked erbium-doped fiber laser. It combines saturable absorption and nonlinear polarization evolution to produce stable and purified femtosecond pulses with a high repetition rate of 212 MHz. The average output power is larger than 65 mW, and the single-pulse energy is 0.31 nJ at a pump power of 750 mW. A wide spectrum with FWHM of 61.4 nm is obtained. The dechirped pulse duration is 41.9 fs, which is near the transform-limited range.
Direct Generation of 62-Fs Pulses in an Erbium-Doped Fiber Laser

Junwen Li,Handing Xia,Wenxiong Du,Heping Li,Yong Liu

DOI: https://doi.org/10.1117/12.2500947

2018-01-01

Abstract:We present a passively mode-locked erbium-doped fiber ring laser with near-zero net cavity dispersion using the nonlinear polarization rotation technique. The compact all-fiber laser is constructed by utilizing an optical integrated component. Through optimizing the cavity dispersion and nonlinearity, high-peak-power near-transform-limited pulses with a spectral width beyond the gain bandwidth limitation can be directly obtained from the laser. Resultant output pulses have a pulse duration of 62 fs, a 3-dB spectral width of 66.3 nm, and a maximum peak power of 7.9 kW. Numerical simulations reproduce the generation of sub-100-fs pulses in the laser. The pulse-shaping mechanism can be attributed to simultaneous dispersion and nonlinearity management in the cavity, which is distinct from that in the stretched-pulse lasers.
Generation of 1.2 GHz, 40 Fs Pulses Directly from a Mode Locked Yb:fiber Laser

Ya Wang,Ruoao Yang,Zhendong Chen,Duo Pan,Bin Luo,Zhigang Zhang,Jingbiao Chen

DOI: https://doi.org/10.1364/cleo_at.2024.jw2a.41

2024-01-01

Abstract:We demonstrated generation of 40 fs pulses from a 1.2 GHz repetition rate Yb:fiber laser at an average power up to 1.3 W.
Pulse Energy Scaling by Optimizing Cavity Management in Low Repetition Rate Erbium-Doped Fiber Femtosecond Lasers

Junsong Peng,Li Zhan,Shouyu Luo,Qishun Shen

DOI: https://doi.org/10.1109/jqe.2013.2249495

IF: 2.5

2013-01-01

IEEE Journal of Quantum Electronics

Abstract:We experimentally demonstrate direct generation of 51 nJ, 284-fs ultrashort pulses in an all-fiber cavity-optimized erbium-doped laser with a low repetition rate of 2.68 MHz. The conversion efficiency of the laser is about 10%. The laser is mode-locked by nonlinear polarization rotation. Such high energy and ultrashort duration benefits from using large output ratio (90%), elongating the cavity length, dispersion management, and bidirectional high-power pumping in the laser. Further decreasing the net dispersion of the laser by using a dispersion-compensated fiber can reduce the pulse duration to 160 fs. In addition, variation of spectral width due to an invisible filter in the laser is experimentally demonstrated.
Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

Jiaqi Zhou,Weiwei Pan,Yan Feng

DOI: https://doi.org/10.1364/cleo_at.2019.jw2a.75

2019-01-01

Abstract:We report on an Er-doped fiber laser which can generate few-cycle pulses with excellent long-term stability. The all-polarization-maintaining fiber oscillator can produce 50-fs pulses with 13.6-mW average output power at 85.3-MHz repetition rate. (C) 2019 The Author(s)
55-fs pulse generation without wave-breaking from an all-fiber Erbium-doped ring laser.

Dinghuan Deng,Li Zhan,Zhaochang Gu,Yi Gu,Yuxing Xia

DOI: https://doi.org/10.1364/oe.17.004284

IF: 3.8

2009-01-01

Optics Express

Abstract:We demonstrate the direct generation of 55 fs pulses from an all-fiber Erbium-doped ring laser oscillator using the nonlinear polarization rotation mode-locking. The average output power is 56.4 mW but limited by available pump power of 330 mW. The linear chirped pulse duration is 55 fs after recompression using standard single-mode fiber. The pulses show to resist optical wave breaking with a smooth spectrum without any side lobe and cw-breakthrough. This all-fiber laser exhibits relatively high transfer efficiency of 17% and the single pulse energy reaches 1.5 nJ.
High Repetition Rate Passively Mode-Locked Erbium-Doped Fiber Laser

Jing Li,YongHeng Dai,ZhiGang Zhang

DOI: https://doi.org/10.1007/s11434-008-0150-7

2008-01-01

Abstract:We report a passively mode-locked high repetition rate erbium-doped femtosecond fiber laser via nonlinear polarization rotation, with a fundamental repetition rate of 101.94 MHz. The output power is 34 mW when pumped by a single mode fiber coupled laser diode at 370 mW. The spectral width is 25 nm, corresponding to a transform limited pulse width of 105 fs.
55-fs pulse generation from an Erbium-doped all-fiber ring laser working on wave-breaking- free regime

Dinghuan Deng,Li Zhan,Zhaochang Gu,Yi Gu,Yuxing Xia

DOI: https://doi.org/10.1364/OE.17.004284

IF: 3.8

2009-01-01

Optics Express

Abstract:We demonstrate the direct generation of 55 fs pulses from an all-fiber Erbium-doped ring laser oscillator using the nonlinear polarization rotation mode-locking. The average output power is 56.4 mW but limited by available pump power of 330 mW. The linear chirped pulse duration is 55 fs after recompression using standard single-mode fiber. The pulses show to resist optical wave breaking with a smooth spectrum without any side lobe and cw-breakthrough. This all-fiber laser exhibits relatively high transfer efficiency of 17% and the single pulse energy reaches 1.5 nJ. (C) 2009 Optical Society of America

44.6 Fs Pulse Generation in an Er:fiber Laser at 540 MHz Repetition Rate

37.4 fs pulse generation in an Er:fiber laser at a 225 MHz repetition rate.

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

464 MHz repetition rate erbium doped soliton fiber laser

A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

Sub-100khz Repetition Rate Mode-Locked Dispersion Managed Erbium-Doped Fiber Laser

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

34.3 Fs Pulse Generation in an Er-doped Fibre Laser at 201 MHz Repetition Rate

325 Mhz and Near Transform-Limited Pulse Output Directly from an Er:Fiber Ring Laser

Direct Generation of 148 nm and 44.6 fs Pulses in an Erbium-Doped Fiber Laser

41.9 fs hybridly mode-locked Er-doped fiber laser at 212 MHz repetition rate

30 Fs Level Pulse Generation Directly from an Er:fiber Laser

439 MHz, 94 fs, low-threshold mode-locked all fiber ring laser

419 Fs Hybridly Mode-Locked Er-doped Fiber Laser at 212 MHz Repetition Rate

Direct Generation of 62-Fs Pulses in an Erbium-Doped Fiber Laser

Generation of 1.2 GHz, 40 Fs Pulses Directly from a Mode Locked Yb:fiber Laser

Pulse Energy Scaling by Optimizing Cavity Management in Low Repetition Rate Erbium-Doped Fiber Femtosecond Lasers

Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

55-fs pulse generation without wave-breaking from an all-fiber Erbium-doped ring laser.

High Repetition Rate Passively Mode-Locked Erbium-Doped Fiber Laser

55-fs pulse generation from an Erbium-doped all-fiber ring laser working on wave-breaking- free regime