Abstract:The phenomenon of fretting fatigue damage is related to tribological behaviour and commonly occurs at the contact interface between two bodies that sustain oscillation loads. Based on the complicated mechanical situation, several methods have been developed to predict the crack initiation location and life. The Continuum Damage Mechanics (CDM) approach in conjunction with Finite Element Method (FEM) is used in this paper. The fretting fatigue lifetime includes two parts, crack initiation lifetime and crack propagation lifetime, and this paper focuses on the phase of crack initiation. Homogeneous materials are usually studied in fretting fatigue problems, and the influence of defects is necessary to be considered. In this study, the authors proposed several models to consider the effect of heterogeneity on crack initiation point and crack initiation lifetime and the numerical model is a 2D one with plane strain assumption. To get more accurate numerical results with low computational cost, a Two-Scale Analysis approach is developed in this paper. Two macroscopic models and three microscopic models are proposed, including a Macroscopic homogeneous model (Macro-HOMO), a Multiscale Homogenization model with Direct Numerical Simulation (MH-DNS), a Microscopic homogeneous model (Micro-HOMO), a Microscopic Model with equivalent material properties by using Mean Field Homogenization method (Micro-MFH), and a microscopic model with Direct Numerical Simulation (Micro-DNS). The results obtained by using the CDM approach with different microscopic models are compared, which shows that the prediction accuracy of the Micro-DNS is the best. In addition, in terms of computational cost, the Micro-DNS model shows great advantages as well comparing to the Macro-DNS model.

Determination of Equivalent Crack Length for Voids in Metallic Alloys Based on Continuum Damage Mechanics Modeling

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Fatigue life prediction model of metallic materials considering crack propagation and closure effect

Crack growth-based life prediction for additively manufactured metallic materials considering surface roughness

Fatigue life assessment of nickel-based single crystals considering equivalent initial flaw size model and anisotropy

A fatigue life prediction approach for porosity defect-induced failures in directed energy deposited Ti-6Al-4V considering crack growth environment

Equivalent characterization of initial crack size of blunt notched components based on test data and physical model

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Study on Fatigue Life of Aluminum Alloy 6061-T6 Based on Random Defect Characteristics

Fatigue analysis for the aluminum alloy 7050-T7451 performed by a two scale continuum damage mechanics model

Prediction of Fatigue Crack Initiation under Variable Amplitude Loading: Literature Review

Towards a general damage law for interior micro-defect induced fatigue cracking in martensitic steels

Application Of A Cohesive Zone Model For Simulating Fatigue Crack Growth From Moderate To High Delta K Levels Of Inconel 718

A continuum damage model for prediction of crack initiation life of pitting corrosion and fatigue

Fatigue life prediction of aluminum alloy 6061 based on defects analysis

Two-Scale Analysis of Fretting Fatigue crack initiation in heterogeneous materials using Continuum Damage Mechanics Approach

Life Prediction of Corrosion-Fatigue Based on a New Crack Growth Rate Model with Damage and the Extended Finite Element Method

An engineering model of fatigue crack growth under variable amplitude loading

Multiaxial Fatigue Life Predictions of Additively Manufactured Metals Using a Hybrid of Linear Elastic Fracture Mechanics and a Critical Plane Approach

The potency of defects on fatigue of additively manufactured metals