Abstract:Abstract Additive manufacturing (AM) is a developing manufacturing technology, which provides excellent attributes compared to other manufacturing techniques. However, one of the critical challenges is the presence of defects that hinder the mechanical properties of the parts, particularly the fatigue life. Experimental understanding of fatigue is a cumbersome process. Therefore, numerical prediction based on specified conditions (such as porosity and applied load) can be an alternative to experimental analysis at the design stage of AM parts. In this study, elastic–plastic finite element analysis (FEA) is performed to obtain the stress distribution around pores, and their resultant effect on fatigue life for L-PBF (laser powder bed fusion) produced AlSi10Mg alloy samples. The stress field is calculated for both single and multiple pore models, where stress concentration is evaluated as a function of the pore’s location and its size. It is found that both pore location and size affect the stress field; however, location effects dominate over pore size. For the same remote applied stress level, the stress concentration around the pore increases with an increase in pore size, and the local maximum stress occurs near the pores that are closest to the surface. The current study also evaluates the relative effect of porosity fraction, average pore size, and location. It is found that the magnitude and sensitivity of stress concentration are hierarchically controlled by porosity location, pore size, and porosity density. A multi-scale finite element (FE) model is proposed based on inherent porosity data measured using Computed Tomography (CT) to predict overall fatigue life. The fatigue cycles are calculated using the rainflow counting algorithm in FE Safe using the stress–strain data obtained from the proposed FEA model. Using the proposed model, it is possible to generate S–N curves for any loading condition for a given porosity condition (porosity density and average pore size). The S–N curve results obtained from the FE model are compared to the experimental observations. The predicted fatigue life shows approximately 5% error with experimental results at high stress loading conditions. However, the proposed model overpredicts the fatigue life at low stress loading by almost 30%.

The potency of defects on fatigue of additively manufactured metals

A Novel Machine-Learning Based Framework for Calibrating Micromechanical Fracture Model of Ultra-Low Cycle Fatigue in Steel Structures

A machine-learning fatigue life prediction approach of additively manufactured metals

Critical physics informed fatigue life prediction of laser 3D printed AlSi10Mg alloys with mass internal defects

In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy

Machine learning based very-high-cycle fatigue life prediction of AlSi10Mg alloy fabricated by selective laser melting

Fatigue-life prediction of additively manufactured metals by continuous damage mechanics (CDM)-informed machine learning with sensitive features

High-temperature high-cycle fatigue performance and machine learning-based fatigue life prediction of additively manufactured Hastelloy X

Recent developments and future trends in fatigue life assessment of additively manufactured metals with particular emphasis on machine learning modeling

Fatigue Performance of Laser Powder Bed Fusion Manufactured TiB 2 /AlSi10Mg Composite: Experimental Investigation and Fracture Mechanics-Based Life Prediction Model for Defect Tolerance Analysis

Analysing the effect of defects on stress concentration and fatigue life of L-PBF AlSi10Mg alloy using finite element modelling

Defect tolerant fatigue assessment of AM materials: Size effect and probabilistic prospects

Prediction of Fatigue Crack Damage Using In-Situ Scanning Electron Microscopy and Machine Learning

Crack growth-based life prediction for additively manufactured metallic materials considering surface roughness

Fatigue life prediction of additively manufactured AlSi10Mg based on surface roughness and residual stress

Defect characteristics-based low-cycle fatigue life prediction model for additive manufactured Ti-6Al-4 V alloys

High-cycle fatigue life prediction of L-PBF AlSi10Mg alloys: a domain knowledge-guided symbolic regression approach

Data-driven fatigue life prediction in additive manufactured titanium alloy: A damage mechanics based machine learning framework

Machine learning for predicting fatigue properties of additively manufactured materials

Fatigue performance of metal additive manufacturing: a comprehensive overview

Defect sensitivity and fatigue design: Deterministic and probabilistic aspects in AM metallic materials