Abstract:Accurately assessing the fatigue performance of components is the key to ensuring structural integrity and reliability, but there is a lack of fatigue life prediction methods that effectively couple the stress gradient effect, the non-proportional additional strengthening effect, and the size effect. Accordingly, a fatigue life prediction model for notched specimens under multiaxial loading is established by analyzing the influence of tension–torsion proportional load and tension–torsion non-proportional load on the fatigue strength of notched specimens. Firstly, based on the energy critical plane method, the location of the critical plane is determined with the help of the coordinate transformation principle. Secondly, the material constant is used to quantify the level of cyclic strengthening, and a non-proportional additional strengthening function is proposed by considering the influence of phase difference. Thirdly, the influence of the non-uniform stress field at the notch root on the fatigue life is considered, and the distribution of equivalent stress on the specific paths is extracted and normalized to give an equivalent stress gradient factor. Then, a fatigue strength reduction factor is constructed by considering the influence of different notch geometrical parameters. Finally, a fatigue life assessment method for notched specimens is proposed based on the Manson–Coffin equation. With the help of the test data of three materials, En8, Al7050-T7451, and GH4169, the method is validated and compared with the calculation results of the Manson–Coffin equation, SWT model, and FS model. The results show that the prediction accuracy of the method in this study is high, which is located in the two-fold error dispersion band, and the prediction results are better than that of the other three models.

Equivalent characterization of initial crack size of blunt notched components based on test data and physical model

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

A Transition Size of Dividing Crack Initiation and Propagation Phases and the Fatigue Total Life Prediction Approach

An engineering model of fatigue crack growth under variable amplitude loading

Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory

Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses

A Structural Stress Approach Accounting for Notch Effects on Fatigue Propagation Life: Part I Theory

Fracture mechanics approach to fatigue crack initiation at uniaxially loaded notches

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

Fatigue life evaluation of notched components affected by multiple factors

Probabilistic fatigue assessment of notched components under size effect using critical distance theory

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Crack growth-based life prediction for additively manufactured metallic materials considering surface roughness

Probabilistic fatigue evaluation of notched specimens considering small sample properties under multiaxial loading

Determination of Equivalent Crack Length for Voids in Metallic Alloys Based on Continuum Damage Mechanics Modeling

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

Fatigue Crack Initiation and Propagation Relation of Notched Specimens with Welded Joint Characteristics

A comparative study of several life prediction models based on the critical plane approach for fretting fatigue crack initiation

Stress-Based Model for Calculating the Opening Angle of Notch Cracks in a Magnesium Alloy under Multiaxial Fatigue