Abstract:A passivation shell, comprising a surface fast ion conductor Li1.25Al0.25Ti1.5O4 layer and a near‐surface rock‐salt region, is established through co‐infiltrating Al/Ti into LiNi0.83Co0.07Mn0.1O2 (SNCM). The composite surface engineering effectively suppresses planar gliding and microcracking, enabling fast ion transport and improved structural stability for SNCM. It exhibits an ultrahigh capacity retention of 88.9 % after 400 cycles at 1C. Nickel‐rich layered oxides are a class of promising cathodes for high‐energy‐density lithium‐ion batteries (LIBs). However, their structural instability derived from crystallographic planar gliding and microcracking under high voltages has significantly hindered their practical applications. Herein, resurfacing engineering for single‐crystalline LiNi0.83Co0.07Mn0.1O2 (SNCM) cathode is undertaken. A passivation shell, comprising a surface fast ion conductor Li1.25Al0.25Ti1.5O4 (LATO) layer and a near‐surface confined cation hybridization region, is established through co‐infiltrating Al and Ti into SNCM, which can profoundly improve structural stability. Compelling evidences show that high‐conductivity LATO‐overcoat facilitates Li+ conduction and resists electrolyte attack. The introduction of strong Al─O bonds and resurfacing regions stabilize bulk and near‐surface lattice oxygen respectively during cycling, thus hindering the formation of oxygen vacancies and the occurrence of detrimental phase transformations, ultimately suppressing the crystallographic planar gliding and nanocracking. Subsequently, the modified SNCM drastically outperforms the baseline SNCM, exhibiting an ultrahigh 88.9% retention rate of original capacity at 1.0C after 400 cycles, and a discharge capacity of 146.8 mAh g−1 with a 92.6% capacity retention rate after 200 cycles at 5.0C within a voltage window of 2.7–4.3 V. The promising performance demonstrated by the multifunctional surface coating highlights a new way to stabilize Ni‐rich cathodes for LIBs.

Surface Engineering of Nickel-Rich Single-Crystal Layered Oxide Cathode Enables High-Capacity and Long Cycle-Life Sulfide All-Solid-state Batteries

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

High‐Capacity, Long‐Life Sulfide All‐Solid‐State Batteries with Single‐Crystal Ni‐Rich Layered Oxide Cathodes

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Dual modified NCMA cathode with enhanced interface stability enabled high-performance sulfide-based all-solid-state lithium battery

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

Surface‐to‐Bulk Synergistic Modification of Single Crystal Cathode Enables Stable Cycling of Sulfide‐Based All‐Solid‐State Batteries at 4.4 V

Mitigating Planar Gliding in Single‐Crystal Nickel‐Rich Cathodes through Multifunctional Composite Surface Engineering

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode for Stable All-Solid-State Sulfide-Based Batteries

Improved Interfacial Contact and Electrochemical Performance of Highly Ni-rich LiNixCoyMn1-x-yO2 (x>90%) Cathode in All-Solid-state Lithium Battery

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability

Surface-modified and sulfide electrolyte-infiltrated LiNi0.6Co0.2Mn0.2O2 cathode for all-solid-state lithium batteries

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie