Abstract:A lattice‐matched MTO coating has successfully been built on ultrahigh single‐crystal LiNi0.9Co0.05Mn0.05O2 particle by a neoteric in situ chemical reaction process, which can not only relieve lattice strain by avoiding inhomogeneity of the Li‐ion concentration, but also suppress cation mixing and irreversible oxygen loss for ensuring the smooth transportation of Li‐ion, thus preventing planar gliding and delamination cracking along the sliding planes. Planar gliding along with anisotropic lattice strain of single‐crystalline nickel‐rich cathodes (SCNRC) at highly delithiated states will induce severe delamination cracking that seriously deteriorates LIBs' cyclability. To address these issues, a novel lattice‐matched MgTiO3 (MTO) layer, which exhibits same lattice structure as Ni‐rich cathodes, is rationally constructed on single‐crystalline LiNi0.9Co0.05Mn0.05O2 (SC90) for ultrastable mechanical integrity. Intensive in/ex situ characterizations combined with theoretical calculations and finite element analysis suggest that the uniform MTO coating layer prevents direct contact between SC90 and organic electrolytes and enables rapid Li‐ion diffusion with depressed Li‐deficiency, thereby stabilizing the interfacial structure and accommodating the mechanical stress of SC90. More importantly, a superstructure is simultaneously formed in SC90, which can effectively alleviate the anisotropic lattice changes and decrease cation mobility during successive high‐voltage de/intercalation processes. Therefore, the as‐acquired MTO‐modified SC90 cathode displays desirable capacity retention and high‐voltage stability. When paired with commercial graphite anodes, the pouch‐type cells with the MTO‐modified SC90 can deliver a high capacity of 175.2 mAh g−1 with 89.8% capacity retention after 500 cycles. This lattice‐matching coating strategy demonstrate a highly effective pathway to maintain the structural and interfacial stability in electrode materials, which can be a pioneering breakthrough in commercialization of Ni‐rich cathodes.

Improved Interfacial Contact and Electrochemical Performance of Highly Ni-rich LiNixCoyMn1-x-yO2 (x>90%) Cathode in All-Solid-state Lithium Battery

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Dual modified NCMA cathode with enhanced interface stability enabled high-performance sulfide-based all-solid-state lithium battery

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Synthesis of Single Crystal LiNi 0.92 Co 0.06 Mn 0.01 Al 0.01 O 2 Cathode Materials with Superior Electrochemical Performance for Lithium Ion Batteries

Solid-state approach for synthesizing single crystal LiNi0.8Co0.1Mn0.1O2 cathode of lithium-ion batteries

Highly‐Dispersed Submicrometer Single‐Crystal Nickel‐Rich Layered Cathode: Spray Synthesis and Accelerated Lithium‐Ion Transport

Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Mechanistic Origin for High Structural Stability of Single Crystalline Nickel‐Rich Cathode Materials Via Al and Sm Co‐Doping

Synthesis of single-crystal LiNi0.8Co0.1Mn0.1O2 materials for Li-ion batteries by microfluidic technology

Rational structure of rod-like single crystal LiNi0.9Co0.05Mn0.04Al0.01O2 cathode for superior-stable lithium-ion battery

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies

Enhanced Structure/Interfacial Properties of Single‐Crystal Ni‐Rich LiNi0.92Co0.04Mn0.04O2 Cathodes Synthesized Via LiCl‐NaCl Molten‐Salt Method

Improving Structure and Electrochemical Performance of Single-Crystal Ni-Rich Cathodes by Aluminium Doping

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes

In-situ coating and surface partial protonation co-promoting performance of single-crystal nickel-rich cathode in all-solid-state batteries

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Mitigating Planar Gliding in Single‐Crystal Nickel‐Rich Cathodes through Multifunctional Composite Surface Engineering