Abstract:In order to achieve a high energy density, Ni-rich polycrystalline materials have been explored as cathode materials for application in ASSLB applying sulfide solid electrolyte. However, the interaction between the electrode and the solid electrolyte comes with severe problems, such as a poor solid electrolyte interface and interfacial stress fracturing during the charge-discharge process. To alleviate the side reaction and the interfacial resistance, a coating layer between the cathode and sulfide electrolyte has since been proposed and developed. However, the inner surface of the primary particles in the polycrystalline can also be a form of coating layer, which does not meet the solid electrolyte and it is hence an inefficient coating mechanism for an ASSLB where the cathode/electrolyte interface occurs purely at the cathode outer surface. Here, we report a new coating strategy for Ni-rich polycrystalline cathode materials using a sol-gel process that focusses on improving the cathode/electrolyte interface of ASSLB. Commercial polycrystalline LiNi 0.8 Co 0.1 Mn 0.1 O 2 was coated with 1 wt% lithium and cobalt acetate precursor with different coating coverage being achieved via control of the stirring speed (200 and 600 rpm). The coating materials, which uniformly coated on the inner and outer surfaces of the polycrystalline (I-NCM), showed effectively improved electrochemical performance with the structural stability in LIB, where the liquid electrolyte has contact with inner surface of polycrystalline materials. However, the cathode material, which was mainly coated on the outer surface of polycrystalline materials (O-NCM), exhibited improved performance in the ASSLB, which only has contact with the electrolyte at the surface of the active material polycrystalline. The physical properties of the coated cathode material were analyzed using SEM and XRD, and the electrochemical performance was investigated through initial charge/discharge capacity and cycle stability in both LIB and ASSLB simultaneously. This concept of intentionally surface coating the polycrystalline material can be applied as a new coating strategy to realize improvements in both electrochemical properties and electrode structural stability of ASSLB.

In-situ coating and surface partial protonation co-promoting performance of single-crystal nickel-rich cathode in all-solid-state batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through an ultrathin and amorphous Al2O3 coating

Overcoming the interfacial challenges of Ni-rich layered oxide cathodes for all-solid-state batteries through ultrathin and amorphous Al2O3 coating

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Selective outer surface modification of polycrystalline Ni-rich cathode for sulfide all-solid-state lithium-ion battery

Improved Interfacial Contact and Electrochemical Performance of Highly Ni-rich LiNixCoyMn1-x-yO2 (x>90%) Cathode in All-Solid-state Lithium Battery

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

The Effect of Single versus Polycrystalline Cathode Particles on All‐Solid‐State Battery Performance

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

Enhanced Electrochemical Stability and Extended Cycle Life in Sulfide-Based All-Solid-State Batteries: The Role of Li10 SnP2 S12 Coating on Ni-Rich NCM Cathode

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

Heuristic Design of Cathode Hybrid Coating for Power‐Limited Sulfide‐Based All‐Solid‐State Lithium Batteries

Enhancing Interfacial Stability in Sulfide All-Solid-state Batteries Through Surface Dual-Doping of Zr and F in Ni-rich Cathodes

Stabilizing Effect of a Hybrid Surface Coating on a Ni-Rich NCM Cathode Material in All-Solid-State Batteries

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries