Abstract:Compared with traditional liquid and solid processing methods, semi-solid die casting process can apparently overcome shrinkage cavity and porosity defects in castings and high deformation resistance and high residual stress shortcomings in forging parts. Semi-solid die casting process with advantages such as high efficiency and low cost, will become the optimal process for high quality automobile parts. In this study, using the clamp as an example, the author introduced product structure optimization and die design for semi-solid die-casting process of aluminum alloy in a new product development.The Computer Aided Engineering technology was applied to the product structure optimization according to the stress analysis. The optimal mold structure, including cavity layout, gating system, overflow and vent systems, were confirmed based on the die design criteria for traditional die casting, combining with the characteristics of semi-solid forming and the simulation results. The semi-solid aluminum alloy clamp parts with excellent performances were finally developed successfully by means of product structure optimization, die design, parameters optimization of die casting process, and the mechanical properties test of products.The existing parts were optimized to make them more suitable for semi-solid die casting processing. In addition, a reasonable die design specially for semi solid processing was an important guarantee for a successful semi solid product applied in industry. Computer numerical simulation was applied in product structure design for semi-solid die casting, die design, die-casting process optimization and other aspects, to shorten the development cycle of new product, reduce cost and improve efficiency.

Semi-solid forming and casting technology of aluminum magnesium alloy pot

Low Pressure Sand Mould Casting Technology for Heavy Aluminum Alloy Casting

Development of Semi-Solid Die Casting Process Technology for Aluminium Alloy Clamp

Industrialization of Aluminum Alloy Uniform Solidification Controlled Rheological Die Casting

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Semisolid rheoforming of magnesium alloys: A review

Study on a Semi-Solid Rheo-Diecasting Process With AZ91D Alloy Slurry

Experimental and simulation study for rewelding defects during the flow process of Semi-solid die casting

Method for processing magnesium alloy

Semi-Solid Moulding of AZ91D Magnesium Alloy

Discussion of Key Problems on Thixotropic Die-casting in Semi-solid Aluminum Alloys

Progress and Prospect of Research and Application of Semi-Solid Alloy Rheoforming Processes

Study on Semisolid Rheo-Diecasting Process, Microstructure and Mechanical Properties of Mg-6Al-1Ca-0.5Sb Alloy with High Solid Fraction

Production of magnesium alloy complex thin-walled parts by investment casting

New Technique of Casting-rolling Strips for Semi-solid Magnesium Alloys

On-line Preparation Technology of Semi-Solid Slurry of A356.2 Alloy

Rheoforming Processing of Al Alloys with Slurry Preparation System and Component Shaping System Apart

Solidification behavior and enhanced properties of semi-solid Al–8Si–0.5Fe alloys fabricated by rheo-diecasting

Alloy ingot casting mould with cooling device and ingot casting method thereof

Rheo-Diecasting of Magnesium Alloys