Abstract:Polymer electrolyte membrane fuel cell (PEMFC) operating under high-temperature and low-humidity (HTLH) conditions enables more efficient and compact fuel cell system through smaller radiators (less parasitic power) and smaller humidifier, but exerts negative influence on conductivity of perfluorosulfonic acid (PFSA) membrane, which is the most commercial proton conductor for PEMFC at current state. Although great progress has been made on the R&D of advanced PFSA-based material, a huge gap from material to PEMFC still exists due to its complicated physico-chemical processes. In this work, after a slight rise of operation temperature, we observe the unexpected voltage collapse of PEMFC under HTLH conditions and non-active zone (nearly zero local current density) is found to fast propagate from air inlet to the rest area during this period. For the first time, temporalspatial numerical reconstruction of this dynamic process reveals that the current in-plane redistribution raises the local mass transfer losses but make limited contribution. Instead, the water being transferred from anode to cathode due to proton's dragging effect leads to severe anode ionomer dehydration, dominating such process. Finally, suggestions are provided as following: (a) raising membrane conductivity under dry condition or reducing proton's dragging coefficient could significantly improve PEMFC's performance under HTLH condition; (b) particular attention should be paid to the water content of anode ionomer for PEMFC design and system control.

Degradation Mechanism Analysis of a Fuel Cell Stack Based on Perfluoro Sulfonic Acid Membrane in Near-Water Boiling Temperature Environment

Aspects of the Chemical Degradation of Pfsa Ionomers Used in Pem Fuel Cells

Degradation Analysis of the Core Components of Metal Plate Proton Exchange Membrane Fuel Cell Stack under Dynamic Load Cycles

Proton exchange membrane fuel cell degradation under close to open-circuit conditions

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

Experimental Study on the Effect of Flow Channel Parameters on the Durability of PEMFC Stack and Analysis of Hydrogen Crossover Mechanism

Degradation Study of Membrane Electrode Assembly with PTFE/Nafion Composite Membrane Utilizing Accelerated Stress Technique

Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack

Failure Behavior of Gas Diffusion Layer in Proton Exchange Membrane Fuel Cells

Theoretical and Experimental Study of a Fuel Cell Stack Based on Perfluoro-sulfonic Acid Membranes Facing High Temperature Application Environments

Investigation of the Temperature-Related Performance of Proton Exchange Membrane Fuel Cell Stacks in the Presence of CO

Degradation Behavior of Membrane–electrode-Assembly Materials in 10-Cell PEMFC Stack

Investigation of Dynamic Driving Cycle Effect on Performance Degradation and Micro-Structure Change of PEM Fuel Cell

Rapid degradation characteristics of an air‐cooled PEMFC stack

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

Primary Study on Degradation Mechanism of Polystyrenesulfonic Acid Membrane and Its Composite Membrane in Fuel Cells

Mechanistic investigation on the voltage collapse of polymer electrolyte membrane fuel cell under high-temperature and low-humidity conditions

Degradation Behaviors Of Perfluorosulfonic Acid Polymer Electrolyte Membranes For Polymer Electrolyte Membrane Fuel Cells Under Varied Acceleration Conditions

Degradation mechanism analysis of substrate and microporous layer of gas diffusion layer in proton exchange membrane fuel cell

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

A Polymer Electrolyte Fuel Cell Life Test Using Accelerating Degradation Technique